Easternest with Easter Bunny and Eggs
von graph
Druckbare Dateien (8)
-
stlOsternest-Ei-4.stl
1.7 Mo · 4 083 Downloads
-
stlOsternest-Hase.stl
3.9 Mo · 4 270 Downloads
-
stlOsternest-Ei-5.stl
2.1 Mo · 4 090 Downloads
-
stlOsternest-Ei-1.stl
2 Mo · 4 052 Downloads
-
stlOsternest-Ei-2.stl
2 Mo · 4 052 Downloads
-
stlOsternest-Ei-6.stl
2.1 Mo · 4 062 Downloads
-
stlOsternest-Ei-3.stl
2 Mo · 4 054 Downloads
-
stlOsternest_Nest.stl
9.7 Mo · 4 169 Downloads
Beschreibung
The Easter nest consists of several printing parts and can therefore be printed in a variety of colors. The set of nest, Easter bunny and six Easter eggs is designed to be plugged together.
The flat nest with the printable eggs also provides space for own eggs, such as e.g. Chocolate eggs.
This free 3D model by GRAVITYSHAPES.com is based on the “Swing Easter Eggs Crasher Set”. Some parts like the nest are also compatible with the swing set. For more printing tips and information (in English and German) about this EASTERNEST with Bunny and Eggs visit:
https://gravityshapes.com/design/ostereier-kracher-schaukel-und-osternest/
https://gravityshapes.com/en/produkt/osternest-mit-hase-und-eier/
Easy to print and assemble
Layer: 0.2 mm
Support required: No (optional)
Rafts: Yes (recommended for the eggs)
Sizes (assembled): Approx. 11 x 15 x 8 cm
Glue is optional, but is not required if the print results are good.
The sweet easter bunny is from Taurus82 (CC BY 3.0). Thanks.