Amscope Microscope collection - Raspberry Pi Camera V2
von Jahmez
Druckbare Dateien (8)
-
stlMicroscope-Pi_cam_AMSCOPE_collection.stl
1.9 Mo · 1 663 Downloads
-
stlMicroscope-Pi_cam_AMSCOPE_collection_StageCover.stl
101 Ko · 1 669 Downloads
-
stlMicroscope-Pi_cam_AMSCOPE_collection_Stage.stl
279 Ko · 1 665 Downloads
-
stlMicroscope-Pi_cam_AMSCOPE_collection_overEyepiece_WF28mm.stl
211 Ko · 1 650 Downloads
-
stlMicroscope-Pi_cam_AMSCOPE_collection_overEyepiece_38mm.stl
436 Ko · 1 664 Downloads
-
stlMicroscope-Pi_cam_AMSCOPE_collection_Tube_30mm.stl
334 Ko · 1 658 Downloads
-
stlMicroscope-Pi_cam_AMSCOPE_collection_Tube_23mm.stl
283 Ko · 1 661 Downloads
-
stlMicroscope-Pi_cam_AMSCOPE_collection_overEyepiece_36mm.stl
343 Ko · 1 654 Downloads
Beschreibung
The goal was to build a center stage that would fit into different tubes for my two microscopes. That way I don't need to keep taking apart the closure for the pi camera. I could just switch the tubes based on what I needed.
Note: The stage is designed for pi camera v2.
I have two Amscope microscopes. For more info see the scope sections below. The model shouldn't be as important as the type of scope (IE stereo vs compound). If you have a different size you can use this link to edit the pieces with tinkercad: https://www.tinkercad.com/things/45eKlY8O41k
Compound: wf28mm - over eyepiece, 36mm - over eyepiece , and 23mm tube
Stereo: 38mm - over eyepiece and 30mm tube
Note: All the pieces are designed with .5mm or larger tolerance for printing. If your printer has better tolerance some of these pieces may be off. You can correct them in the tinkercad link I provided.
I'll be updating this with photos of each eyepiece once I fix issues with my raspberry pi.