Resistor Box [Stackable & Customizable]

von STTrife

Druckbare Dateien (26)

  • stl

    BoxSingle.stl

    853 Ko · 506 633 Downloads

    Herunterladen
  • stl

    Drawer.stl

    231 Ko · 389 694 Downloads

    Herunterladen
  • stl

    EmptyDrawer.stl

    120 Ko · 387 702 Downloads

    Herunterladen
  • stl

    BoxTopLeft.stl

    591 Ko · 501 160 Downloads

    Herunterladen
  • stl

    Drawer_ThinHandle.stl

    368 Ko · 386 123 Downloads

    Herunterladen
  • stl

    BoxTopMiddle.stl

    307 Ko · 499 689 Downloads

    Herunterladen
  • stl

    EmptyDrawer_ThinHandle.stl

    257 Ko · 385 212 Downloads

    Herunterladen
  • stl

    BoxTopRight.stl

    584 Ko · 498 940 Downloads

    Herunterladen
  • stl

    BoxMiddleLeft.stl

    603 Ko · 497 029 Downloads

    Herunterladen
  • stl

    BoxMiddleMiddle.stl

    320 Ko · 501 039 Downloads

    Herunterladen
  • stl

    BoxMiddleRight.stl

    597 Ko · 497 684 Downloads

    Herunterladen
  • stl

    BoxBottomLeft.stl

    589 Ko · 498 844 Downloads

    Herunterladen
  • stl

    BoxBottomMiddle.stl

    306 Ko · 498 255 Downloads

    Herunterladen
  • stl

    BoxBottomRight.stl

    583 Ko · 497 517 Downloads

    Herunterladen
  • stl

    Connector.stl

    22 Ko · 498 937 Downloads

    Herunterladen
  • stl

    BoxSingleRowLeft.stl

    576 Ko · 495 567 Downloads

    Herunterladen
  • stl

    BoxSingleRowMiddle.stl

    293 Ko · 495 027 Downloads

    Herunterladen
  • stl

    BoxSingleRowRight.stl

    570 Ko · 494 463 Downloads

    Herunterladen
  • stl

    BoxSingleColumnTop.stl

    868 Ko · 494 299 Downloads

    Herunterladen
  • stl

    BoxSingleColumnMiddle.stl

    881 Ko · 494 127 Downloads

    Herunterladen
  • stl

    BoxSingleColumnBottom.stl

    866 Ko · 494 086 Downloads

    Herunterladen
  • stl

    Drawer_TOLERANT.stl

    230 Ko · 382 268 Downloads

    Herunterladen
  • stl

    EmptyDrawer_TOLERANT.stl

    119 Ko · 381 550 Downloads

    Herunterladen
  • stl

    Connector_TOLERANT.stl

    21 Ko · 491 450 Downloads

    Herunterladen
  • stl

    Drawer_ThinHandle_TOLERANT.stl

    366 Ko · 381 235 Downloads

    Herunterladen
  • stl

    EmptyDrawer_ThinHandle_TOLERANT.stl

    255 Ko · 380 908 Downloads

    Herunterladen

Beschreibung

Organize and store your resistors in this neat stackable drawer box. Each drawer had 3 compartments with a length of 6 cm (2.45 inch) that are fit for standard trough-hole resistors. You can stack as many boxes as you need using the connectors. The drawers will not fall out if you open them.

Everything is easy to print, without supports, although to make it fit nicely you need a decent printer, and the standard handle on the drawers expect some 'bridging' from your printer (turn part cooling fan on for PLA). The Thin Handle does not require bridging.

It was specifically designed to be printed at layer height of 0.2 mm, and layer width of 0.48 mm (standard for 0.4mm nozzles). Although it will probably print OK in other settings.

I also included a word-document that you can print, containing labels of the correct sizes for the E-12 resistor values from 10 Ohm to 1 M-Ohm. Feel free to edit them :)
A glue stick is suggested for keeping the labels in place, although it is not strictly necessary.

For stacking, you need to print the right versions of the boxes. The names of the STL files should speak for themselves and tell you where in the array that box will fit. If you are unsure about the final stacking, consider using BoxMiddleMiddle.stl, this can connect on all sides.

Need to refill your resistor boxes?

Many thanks for these user created contributions:

If you have created derivatives that you think are useful to other makers, please send me a link and description!

For any requests or comments, please post a message.

UPDATE 1: This thing is now fully customizable. Make storage boxes of your own specifications using the Thingiverse Customizer, or by editing the .scad file. Have fun!

UPDATE 2:

  • Added an 'empty drawer' on request (STL).
  • These empty drawers, and other custom drawers, can also be created using the customizer.
  • Added a new type of handle for the drawers (thin handle).
  • Added word-document with labels for the thin handle drawers.
  • Fixed an issue when the walls in the drawers could get stuck on the drawer stoppers.

UPDATE 3:

  • Fixed the width of the normal handle to correctly adjust for drawer width.

UPDATE 4:

  • Fixed an issue where the customizer rendered correctly, but would give an error when trying to create a derived thing.
  • Fixed issue with handles on very small drawers.

UPDATE 5:

  • Added 'custom sized box' to the customizer. Create resistor boxes with a specified final size!

UPDATE 6:

UPDATE 7:

  • Fixed an issue with the drawers being made out of several shells, they are single shell now, easier for slicers. All drawer STL files have been re-uploaded.
  • Recreated 'drawer shrink' tolerance setting. the TOLERANT drawers use 0.2mm on this setting. Also changed the behavior on this setting, will no longer shrink the front of the drawer.
  • Fixed the width of the labels in the word files.
  • Added affiliate links for cheap resistors. Thanks to oliver_midbrink (https://www.thingiverse.com/oliver_midbrink/about) for the idea!

UPDATE 8:

  • Added some links to useful user created derivatives and extended label document.

UPDATE 9:

  • Fixed custom box size so the height will be exactly as specified. This may slightly increase the vertical spacing between drawers in some cases.

Tags

#box #drawer #E12 #resistor #storage