Wires Soldering Aid
von Karlosek
Druckbare Dateien (5)
-
stlPeg_Base.stl
85 Ko · 5 892 Downloads
-
stlPeg_Small.stl
51 Ko · 5 916 Downloads
-
stl15_Sparkfun_Alligator_Clip_Adapter.stl
1021 Ko · 5 871 Downloads
-
stl11_Base_Joint.stl
479 Ko · 5 858 Downloads
-
stl12_BallSocket_Joint.stl
1.1 Mo · 5 852 Downloads
Beschreibung
I really admire the Octo+ PCB Workstation but I think I do not have a use for so many probes. However, I needed some helper hands for soldering wires together. So I used parts of that wonderful design and designed some more. :-)
I designed the peg and the base.
Peg can be pushed/glued in the "15_Sparkfun_Alligator_Clip_Adapter"
"11_Base_Joint" can be pushed/glued in the base. You may need to dress the hole in the base a bit (depends on your printer calibration). It is pretty tight fit.
Then, print just as many "12_BallSocket_Joint" as you want to connect the two ends.
Or just use the Peg if you have the Octo+ PCB Workstation printed already.
Thank you Giuseppe Finizia for your wonderful work! I hope you don't mind I am borrowing some of your parts.