KeyHide
von aurelius
1 / 9
Druckbare Dateien (1)
-
stlKeyHide.stl
32 Ko · 2 741 Downloads
Beschreibung
- Usable with different Key types
- Mountable with 2 Screws, glue or double-sided tape (screws preferred)
- Under desk or wall assembly, your choice
Best results with PLA / ABS, 2 Perimeter, 3 full Top/Bottom Layers, 50% honeycomb infill with a 0.4 mm nozzle.
If your printer melts the feather holder gap with the bottom, you must cut them free.