Raspberry Pi 4 Case
von anjanathisal
Druckbare Dateien (18)
-
stlRaspberry_Pi_4_Case_-_Bottom_-Cheese_Grater_Style_With_Mounts.stl
1.2 Mo · 17 926 Downloads
-
stlRaspberry_Pi_4_Case_-_Bottom_With_Mounts.stl
717 Ko · 17 755 Downloads
-
stlRaspberry_Pi_4_Case_-_Bottom_With_M2_Nut_Slots_1.stl
721 Ko · 17 569 Downloads
-
stlRaspberry_Pi_4_Case_-_Bottom_-_Spacious_Design_With_Mounts.stl
699 Ko · 17 594 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_1_1.stl
170 Ko · 22 508 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_2_1.stl
1.3 Mo · 22 329 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_3_1.stl
2.4 Mo · 22 373 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_4_1.stl
548 Ko · 22 318 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_5_1.stl
548 Ko · 22 331 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_6_With_30_mm_Fan_Mount_1.stl
599 Ko · 22 298 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_7_With_30_mm_fan_Mount_1.stl
607 Ko · 22 311 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_8_With_40_mm_Fan_Mount.stl
601 Ko · 22 284 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_9_With_40_mm_fan_Mount.stl
616 Ko · 22 320 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_10_With_GPIO_Cut_1.stl
189 Ko · 21 556 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_11_With_40_mm_fan_Mount_and_GPIO_cut_1.stl
634 Ko · 21 573 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_12_With_30_mm_fan_Mount_and_GPIO_cut_1.stl
626 Ko · 21 536 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_13_Cheese_Grater.stl
1.9 Mo · 17 289 Downloads
-
stlRaspberry_Pi_4_Case_-_Top_Extension_25mm.stl
204 Ko · 17 320 Downloads
Beschreibung
Raspberry Pi 4 was announced and released recently. There were very few case options when I designed this simple case. This case is still under experimenting level. Current design will only be changed if there were any issues with the users. Please share your ideas and sudgestions in the comment section.
My design may not be perfect. So here are the originals on Tinkercad. You can edit them to your preferences.
To mount the Raspberry Pi 4, you may need some M2 nuts and bolts or M2.5 nuts and bolts.
The logo was a design of Stefan Rosenberg. The cheese grater design was by PaulMurrayCbr. Check their designs too!
If you wish to buy anything from Amazon, please use my referral link as a help to me!
Update 1
The initial case top design wasn't fixing properly with the case base. The reason was the bottom part having rounded edges and tops having pointy edges. This was pointed out by Benjamin Summerfield. The 40mm fan mount top part also was added due to request. There were also other suggestions sating about the supports. If your printer is good at bridging, then you don't need support. But if you think you may need supports, then add supports before printing. Thank you guys for helping! Now all the files are updated. Btw sorry about the mistakes.
Update 2
Added 3 top covers with GPIO cut. GPIO edit was suggested by Julien Guerder. I also added nut slots for the bottom part to fix M2 Nuts. Thank you all for the support!
Update 3
Tops with GPIO were updated. The old version had a misalign of about 2mm.
Update 4
First of all, I should thank all who downloaded this, printed this and for all who provide their honest opinion about the design. And also I'm apologizing for my mistakes in the design and for taking longer to update. My special thanks goes to Sebastian for providing me with suggestions, ideas, details and courage. Check on his designs too. Philippe DRT suggested a higher version or an extension method for the case. So I added a 25mm extension that will fit on the top. So you can keep adding them as you need. Also, I added a screw-less mounting system as requested by many people. The new designs also have been slightly adjusted to fit the ports in place. There is also a thinner wall around the display ports to fit the cables more easily. A more spacious version of the case also added with 1.5mm thick walls (normal walls were 2mm thick) to give more interior space. A cheese grater design was also added for both top and bottom designs. Thank you all for the support and sorry for my mistakes. Please keep me informed to provide updates and design changes.