Accel Ringing Test
von blackstumps
Druckbare Dateien (7)
-
stlAccel_test_model_2mmx10_spans.stl
416 Ko · 1 050 Downloads
-
stl
Accel_test_model_3mmx10_spans.stl
418 Ko · 963 Downloads
-
stl
Accel_test_model_4mmx10_spans.stl
486 Ko · 973 Downloads
-
stl
Accel_test_model_2mmx20_spans.stl
838 Ko · 953 Downloads
-
stl
Accel_test_model_3mmx20_spans.stl
840 Ko · 930 Downloads
-
stl
Accel_test_model_4mmx20_spans.stl
887 Ko · 954 Downloads
-
stl
Accel_test_model_v2.stl
341 Ko · 1 091 Downloads
Beschreibung
I made this specifically for testing the S-Curve patch in Klipper firmware but should work equally as well with other firmwares for ringing
I would suggest printing single perimeter no top layers or infill vase mode would be fine also.
I use a single bottom layer but that is optional.
The notches are at 5mm spacing so change parameters every 5mm
I have added some additional models with 2,3,4mm notches and spacing with 10 and 20 notches high