RC Plane Stand
von poharatek
Druckbare Dateien (8)
-
stlstopa.stl
18 Ko · 2 207 Downloads
-
stl
lapa.stl
36 Ko · 2 187 Downloads
-
stl
bok2.stl
68 Ko · 2 188 Downloads
-
stl
belka.stl
85 Ko · 2 184 Downloads
-
stl
obejma.stl
418 Ko · 2 174 Downloads
-
stl
bok1.stl
445 Ko · 2 184 Downloads
-
stl
pokretlom.stl
1.5 Mo · 2 189 Downloads
-
stl
pokretlod.stl
1.5 Mo · 2 177 Downloads
Beschreibung
Simple but solid stand for rc models.
Print settings:
All parts except belka.stl:
layer height: 0.2 mm
top/bottom layers: 3
outline/perimeter shells: 3
infill: 20%
belka.stl
layer height: 0.2 mm
top/bottom layers: 4
outline/perimeter shells: 4
infill: 50%
Supports are needed for parts: pokretlom.stl and pokretlod.stl
In addition to the printed parts you will also need:
6x M6 carriage bolt 30mm long
4x M6 carriage bolt 20mm long
10x M6 nut
2x 32mm (1 1/4 inch) outer diameter PVC tube 50cm long
thin sheet of foam rubber (from old mouse pad)