Toothpicks
von les_kaye
Druckbare Dateien (3)
-
stltoothpicks.stl
12 Ko · 335 Downloads
-
stl
toothpick_box.stl
25 Ko · 320 Downloads
-
stl
toothpick_box_cap.stl
20 Ko · 325 Downloads
Beschreibung
I printed these with a 0.4mm nozzle and 0.20mm layer height and they work really well. They are quite as good as wooden sticks and they do not break while you are using them.
The box takes 6 x 5 = 30 toothpicks in a small convenient size. The lid is reasonably tight and may need sanding for a good fit.