Snips Case V2

von vore76

Druckbare Dateien (4)

  • stl

    Snips_Case_V2_Top.stl

    257 Ko · 261 Downloads

    Herunterladen
  • stl

    Snips_Case_V2_Array_holder.stl

    20 Ko · 251 Downloads

    Herunterladen
  • stl

    Snips_Case_V2_Bottom.stl

    460 Ko · 258 Downloads

    Herunterladen
  • stl

    Snips_Case_V2_Diffusion_disk.stl

    178 Ko · 256 Downloads

    Herunterladen

Beschreibung

A case for my Snips home assistant

I'm still working on the design. There are still some bugs!

The case consists of the bottom case containing the Raspberry Pi, Speakers and the Amplifier.
The Microphone is screwed into a holder which is again screwed below the top case. A transparent peace is fixed about the Microphone in order to see the LEDs. The whole unit can be covered with acoustic cloth at the outside.

Warning

Still working on the design! This is Beta Status. Feel free to give comments. Please keep in mind that Snips will close down on 31.01.2020. I'm looking for an alternative and go on with the work if I find something. Basically this looks quite good to far: https://github.com/project-alice-assistant/ProjectAlice

Tags

#Snips #Snipsai