Pegboard Files
von ejjenkins
Druckbare Dateien (20)
-
stlPegboard-Drill_Front.stl
542 Ko · 898 Downloads
-
stlPegboard-Tape_Holder.stl
664 Ko · 904 Downloads
-
stlPegboard-Long_Hook_Belt_Sander.stl
521 Ko · 888 Downloads
-
stlPegboard-Allen_Wrench.stl
469 Ko · 916 Downloads
-
stlPegboard-Rod_Holder_wire_spool_or_paper_towel.stl
623 Ko · 887 Downloads
-
stlPegboard-Airbrush_Paint_Holder.stl
1.3 Mo · 892 Downloads
-
stlPegboard-Drill_Rear.stl
728 Ko · 896 Downloads
-
stlPegboard-Lathe_Tool.stl
1004 Ko · 893 Downloads
-
stlPegboard-Dremel_Bit_Holder.stl
1.7 Mo · 895 Downloads
-
stlPegboard-Nutdriver_SAE.stl
3 Mo · 935 Downloads
-
stlPegboard-Lathe_Tool_Flat.stl
624 Ko · 887 Downloads
-
stlPegboard-Bin.stl
407 Ko · 902 Downloads
-
stlPegboard-Chisel_Holder.stl
908 Ko · 894 Downloads
-
stlPegboard-Tape_Measure_Tray.stl
759 Ko · 911 Downloads
-
stlPegboard-Lathe_Tool_Small.stl
962 Ko · 890 Downloads
-
stlPegboard-Small_Hook.stl
1 Mo · 912 Downloads
-
stlPegboard-Nutdriver_Metric.stl
3 Mo · 910 Downloads
-
stlPegboard-Strap_Clamp_Holder.stl
641 Ko · 843 Downloads
-
stlPegboard-0.375_Socket_holder.stl
2.2 Mo · 931 Downloads
-
stl
Pegboard-0.25_Socket_holder.stl
1.9 Mo · 928 Downloads
Beschreibung
EDIT: July 31, 2020 - Added a 1/4" socket holder. This holder holds 1/4" sockets and has 9 pegs for sockets. I printed 2, one for metric and one for SAE. I am working on a 3/8" and a 1/2" version now.
EDIT: July 18, 2020 - Added the Strap Clamp Holder. This will hold 2 strap clamps. (https://www.thingiverse.com/thing:4489935) or 2 commercial strap clamps.
Pegboard files I am currently using in my workshop.
Some in the picture were made with Pegstr - Pegboard Wizard: https://www.thingiverse.com/thing:537516
I will add more as I save them from Fusion360 and as I make new ones that I need.
I use this for router bits: Router Bit Pegboard Caddy - https://www.thingiverse.com/thing:3336979/files
Use plenty of perimeters for extra rigidity...I use 5 or 6 with 40% infill. Most parts are nothing but perimeters.