RPG Kit
von BalladBlack
Druckbare Dateien (9)
-
stlRPG_Box-DrawerS.stl
12 Ko · 1 431 Downloads
-
stlRPG_Box-Top.stl
2 Ko · 1 415 Downloads
-
stlRPG_Box-Wheel.stl
217 Ko · 1 433 Downloads
-
stlRPG_Box-TowerFace.stl
12 Ko · 1 393 Downloads
-
stlRPG_Box-Pin.stl
51 Ko · 1 400 Downloads
-
stlRPG_Box-DrawerL.stl
20 Ko · 1 405 Downloads
-
stlRPG_Box-Body.stl
126 Ko · 1 427 Downloads
-
stlRPG_Box-Tower.stl
13 Ko · 1 395 Downloads
-
stlRPG_Box-TopwTrack.stl
97 Ko · 1 217 Downloads
Beschreibung
11/14/22- I have plans to update this file as well as a couple others soon. I will leave the old files here and update this message with a link to the new version in the future.
Magnet size: 10x3, really any size under 10 will work as long as they have around 3mm thickness. Placement of the magnet holes work with the drawer voids to pull them to the back of the body. After printing the body, The 10x3s I have are a really tight fit, so an 8x3 or 6x3 would be easier to place and glue.
Check out my other RPG items:
Dice Box: https://www.thingiverse.com/thing:4697087
RPG Box v2: https://www.thingiverse.com/thing:4697152
Folding Dice Tower: https://www.thingiverse.com/thing:4697803