Nutcracker
von psync
Druckbare Dateien (6)
-
stlNutcracker_head.stl
84 Ko · 1 318 Downloads
-
stlNutcracker_head_2.stl
201 Ko · 1 315 Downloads
-
stlNutcracker_jaw.stl
157 Ko · 1 326 Downloads
-
stlNutcracker_core_body.stl
177 Ko · 1 286 Downloads
-
stlNutcracker_body_right.stl
68 Ko · 1 302 Downloads
-
stlNutcracker_body_left.stl
67 Ko · 1 304 Downloads
Beschreibung
Here's my submission for pattywac's holiday-themed competition, a festive nutcracker. I'm not sure if you can actually crack any nuts with this though, but feel free to customize it.
I had to print this out a few times due to silly overhand errors I made, and also had to split down some parts into sub-parts to minimize "catastrophic" failures in case things go wrong at the tail end of a 1 hour + print. I kind of ran out of time to flesh out the design, but you can fit it on the Cupcake's build platform and use the z-axis to push the lever down. Also, he still needs a hat, arms and a printed mustache...
I've also included my sketchup design files. This was the first time I designed anything in sketchup to be printed, and I'm surprised it worked out well (outside of the silly overhang things I thought would work) Hope you all enjoy it!