Socket Holders - Organizers
von jethier1
Druckbare Dateien (24)
-
stl2_STD_SHALLOW_Pt1.stl
686 Ko · 429 Downloads
-
stl2_STD_SHALLOW_Pt2.stl
1.2 Mo · 420 Downloads
-
stl2_CONNECTOR_SHALLOW_Pt3.stl
93 Ko · 420 Downloads
-
stl2_STD_DEEP_Pt1.stl
914 Ko · 409 Downloads
-
stl
2_STD_DEEP_Pt2.stl
1.2 Mo · 416 Downloads
-
stl2_CONNECTOR_DEEP_Pt3.stl
93 Ko · 404 Downloads
-
stl2METRIC_DeepPT1.stl
802 Ko · 425 Downloads
-
stl2METRIC_DeepPT2.stl
611 Ko · 413 Downloads
-
stl2METRIC_DeepConnectorPT3.stl
91 Ko · 410 Downloads
-
stl
2METRIC_ShallowPT1.stl
802 Ko · 420 Downloads
-
stl
2METRIC_ShallowPT2.stl
611 Ko · 420 Downloads
-
stl2METRIC_ShallowConnectorPT3.stl
91 Ko · 411 Downloads
-
stl8_Metric_SHALLOW_Pt1.stl
809 Ko · 426 Downloads
-
stl
8_Metric_SHALLOW_Pt2.stl
786 Ko · 417 Downloads
-
stl8_Metric_SHALLOW_Connector_Pt3.stl
90 Ko · 408 Downloads
-
stl8_Metric_Deep_Pt1.stl
783 Ko · 413 Downloads
-
stl8_Metric_Deep_Pt2.stl
866 Ko · 409 Downloads
-
stl8_Metric_Deep_Connector_Pt3.stl
90 Ko · 411 Downloads
-
stl
8_STD_Deep_Pt1l.stl
1.1 Mo · 410 Downloads
-
stl
8_STD_Deep_Pt2.stl
858 Ko · 407 Downloads
-
stl8STD_Deep_Connector.stl
91 Ko · 400 Downloads
-
stl8_STD_SHALLOW_Pt1.stl
1 Mo · 413 Downloads
-
stl8__STD_SHALLOW_Pt2.stl
858 Ko · 418 Downloads
-
stl8_STD_SHALLOW_Connector.stl
92 Ko · 406 Downloads
Beschreibung
My First THING.
Anyway some 3/8 and 1/2 socket holders as I had to organize my toolbox. 1/4 is not finalizer yet.
See Pics for socket sizes. Had to split these into a 3 piece set to fit on the build plate of my ender 3v2. Magnet pocket to hold together if needed 3x6mm magnets.
Printed with a brim to prevent corner warping
I modded my machine profile to fit the 1/2. set to 250x250. Also probably not needed for many but I printed the 1/2 using a modded profile for the Ultimaker S3. add that printer and copy over the ender settings. using that profile with the Draft ExtraFast profile cut my print time in half.