Acceleration Test Shape - Print Aid

Looking to install and use ReplicatorG-Sailfish on your Replicator 2?

Here is a step-by-step guide along with Skeinforge profiles tuned for the Replicator 2 that will get you started with 120mm/s printing and all the other wonderful Sailfish trimmings. There is also a test object you can print to confirm you are getting the kind of output you should expect.

UPDATE (28 April 2013)

Updated profiles for ReplicatorG 40(r16) with full 5D pre-prime. I now advise using a combination of firmware de-prime and retraction. Set the firmware de-prime to 16 steps in the onboard preferences. The “Retraction Distance” in the Skeinforge “Dimension” module in these profiles will be set to 2mm.

UPDATE (27 Mar 2013)

I have added a bash script for downloading and installing pypy on the Mac. You will need to run "chmod 755 install-pypy.sh" before you can execute it from the terminal. See the installation guide for details.