Thimble Customizable - OpenScad
von rr2s
Druckbare Dateien (23)
-
stlThimble-Diam10-Height11.stl
5.3 Mo · 5 925 Downloads
-
stlThimble-Diam11-Height12.stl
5.6 Mo · 5 768 Downloads
-
stlThimble-Diam12-Height13.stl
6.4 Mo · 5 772 Downloads
-
stlThimble-Diam13-Height14.stl
6.6 Mo · 5 766 Downloads
-
stlThimble-Diam14-Height15.stl
2.3 Mo · 5 796 Downloads
-
stlThimble-Diam15-Height16.stl
2.9 Mo · 5 820 Downloads
-
stlThimble-Diam16-Height17.stl
2.8 Mo · 5 853 Downloads
-
stlThimble-Diam18-Height20_noTorus_noRenfort_Base.stl
6.9 Mo · 5 769 Downloads
-
stlThimble-Diam18-Height20.stl
6.8 Mo · 5 909 Downloads
-
stlThimble-Diam18-Height20_noTorus.stl
7 Mo · 5 725 Downloads
-
stlThimble-Diam19-Height19.stl
2.9 Mo · 5 730 Downloads
-
stlThimble-Diam20-Height20.stl
12 Mo · 5 809 Downloads
-
stlThimble-Diam21-Height21.stl
2.9 Mo · 5 720 Downloads
-
stlThimble-Diam22-Height22.stl
3 Mo · 5 761 Downloads
-
stlThimble-Diam23-Height23.stl
5.9 Mo · 5 724 Downloads
-
stlThimble-Diam24-Height24.stl
5.3 Mo · 5 691 Downloads
-
stlThimble-Diam25-Height25.stl
6.7 Mo · 5 738 Downloads
-
stlthimble-Diam100-Height110.stl
1.9 Mo · 5 670 Downloads
-
stlthimble-Diam140-Height150.stl
1.9 Mo · 5 680 Downloads
-
stlthimble-Diam190-Height200.stl
1.9 Mo · 5 774 Downloads
-
stlthimble-Diam50-Height50Invert.stl
1.4 Mo · 5 720 Downloads
-
stlthimble-Diam100-Height110Invert.stl
1.4 Mo · 5 707 Downloads
-
stlThimble_Vase.stl
33.9 Mo · 5 760 Downloads
Beschreibung
Sewing with thimbles?
Yes a thimble to the size of my finger.
Those who put a background much sewing thimbles
.
A good habit to get into! (we have enough opportunity to pricking with pins to do not overdo it!)
The thimbles is a small honeycombed cap that is put on the finger of the hand holding the needle (right to a right-handed, left for a left-handed).
To sew, we take the needle between thumb and forefinger and shoot with finger. When it is wearing his dice, the tip of the needle is located naturally in one of the die cavities.
Your thimbles must take on the major, but not too tightly, but without falling.
You can choose to make a useful object or a decorative object such as a sewing giant dice. You also do not create the sphere knew it to be a vase or pot shaped thimbles.
You can adjust:
- The diameter of your finger
- The wall thickness
- The height of your thimbles
- The diameter of the holes
- The circular and vertical holes spacing
- Whether or not you want a torus down
- The diameter of the torus
- You can add a backing down or not to put
- You can simply remove the top sphere for make a vase or pot-shaped thimble.
If you are having any difficulties, need advices or you want me to make changes, I remain at your disposal.
If you want to learn OpenSCAD you can follow these video tutorials :
http://www.thingiverse.com/thing:656880