Wraith
von ClayRade
Druckbare Dateien (4)
-
stlWraith_Left_Hand.stl
3.2 Mo · 107 Downloads
-
stl
Wraith_Right_Hand.stl
6.7 Mo · 101 Downloads
-
stl
Wraith_Handless.stl
51.1 Mo · 105 Downloads
-
stl
Wraith_Complete.stl
56.4 Mo · 241 Downloads
Beschreibung
Spooky scary Wraith!
This is a 28mm miniature suitable for tabletop gaming / paper and pencil RPGs, ala D&D, Pathfinder, etc. It is scaled to fit on a 25.4mm (1 Inch) round base (not included).
This model has many small, delicate features, so it is best printed in resin, unless you plan on upscaling it by a -considerable- percentage in order to try printing in FDM.
A complete and assembled version is included, as well as one with the hands and sword separate.
My supported Chitubox file has been included, but have only tested it on a Saturn 4 Ultra, so you may need different support thicknesses depending on your own printer and resin combination. Some cleanup and sanding will be needed.
If you liked this model and want to show your thanks, you can buy me a coffee!