Triangular Passthrough

It's a very simple passthrough object. I chose a gear as the spiral because it seemed interesting and fun.

Filament used for body: Blue PLA by Creality

Filament used for spiral: Yellow PLA by Creality

Main Settings:

1) A brim is used for the spiral. I used a 5mm brim with a .1mm separation gap.
2) No supports
3) 15% Gyroid infill for both objects.

The rest of the settings are pretty standard. All you really need is a finely tuned printer.

If you'd like to support my work, feel free to follow this link: https://buymeacoffee.com/devilish3dprints - your support is very much appreciated :)