Ball and Socket Mount Changed
von Reduce_Entropy
Druckbare Dateien (11)
-
stl1圆形脖子+穿线孔_Round_neck_+_Increase_wire_holes.STL
414 Ko · 39 Downloads
-
stl2方形脖子+更大穿线孔Square_neck_+_larger_eyelet.STL
495 Ko · 34 Downloads
-
stl
1改成三爪Changed_to_three_claws.STL
1.1 Mo · 33 Downloads
-
stl
2减少3爪厚度Reduce_3-claw_thickness.STL
1010 Ko · 33 Downloads
-
stl
3更改爪距角度Change_claw_angle.STL
1 Mo · 32 Downloads
-
stl4增高爪并改成2爪Increase_the_height_of_the_claw_and_change_it_to_2_claws.STL
819 Ko · 32 Downloads
-
stl3Enlarge放大1.58倍+可穿USB-C数据线1.58x_enlarged_version_+_compatible_with_USB-C_cables.STL
1016 Ko · 17 Downloads
-
stl5.1Enlarge放大1.58倍+可穿USB-C数据线1.58x_enlarged_version_+_compatible_with_USB-C_cables.STL
799 Ko · 18 Downloads
-
stl5.2Enlarge放大1.58倍+可穿USB-C数据线1.58x_enlarged_version_+_compatible_with_USB-C_cables.STL
750 Ko · 16 Downloads
-
stlA-Enlarge附带可旋转基座+支持任意朝向with_rotatable_base_+_supports_any_orientation.STL
763 Ko · 17 Downloads
-
stlB-Enlarge附带可旋转基座+支持任意朝向with_rotatable_base_+_supports_any_orientation.STL
152 Ko · 18 Downloads
Beschreibung
模型来源 | Model Source
中文
此模型改编自Gyrobot的原创设计
首先感谢原作者Gyrobot的分享
English
Below English translation provided by deepseekR1
This model is a remix of Gyrobot's original design.
First and foremost, we extend our appreciation to the original creator Gyrobot for sharing their work.
定制目的 | Customization Purpose
中文
专为未来DIY人体存在传感器项目进行多版本优化：
English
Modified specifically for future DIY human presence sensor projects, this model has gone through multiple iterations:
公头部件（球体）| Male Part (Ball)
中文
版本1
- 基于原版修改
- 圆形颈部设计
- 支持电线穿过
版本2
- 加粗颈部结构
- 可容纳更多线材
- 搭配对应窝部件仍保持角度调节能力
版本3 (放大)
- 基于版本2，放大1.58倍
- 可以穿过USB-C数据线头部
English
Version 1
- Modified from original version
- Features circular neck design
- Allows wire routing
Version 2
- Thicker neck structure
- Accommodates more wires
- Maintains adjustable angles when paired with matching socket
Version 3 (Enlarged)
- Based on Version 2, enlarged by a factor of 1.58
- Allows USB-C cable head to pass through
母头部件（窝体）| Female Part (Socket)
中文
版本1 & 2
- 改为三爪结构
- 减少厚度
- 夹持力轻微下降
- 增强角度可调性
版本3
- 爪间距调整为45°
- 实现约120°定向调节
版本4
- 双爪增高设计
- 顶部角度调节受限
- 支持约180°调节范围
- 覆盖近1/4球面区域
版本5 (放大)
- 5.1： 基于版本4，放大1.58倍
- 5.2： 基于版本3，并将其改成2爪180度
- 可以穿过USB-C数据线头部
- 需搭配“公头部件（球体）版本3”
版本6 (放大)
- 基于版本5.2
- 增加附带可旋转基座
- 支持调节指向任意朝向
- 需搭配“公头部件（球体）版本3”
English
Versions 1 & 2
- Converted to three-claw design
- Reduced thickness
- Slightly decreased clamping force
- Enhanced angular adjustability
Version 3
- Claw interval adjusted to 45°
- Achieves ~120° specific directional adjustment
Version 4
- Implemented dual-claw design
- Increased claw height
- Top angular adjustment limited
- Enables ~180° adjustment range
- Covers nearly a quarter-sphere range
Version 5 (Enlarged)
- 5.1: Based on Version 4, enlarged by a factor of 1.58
- 5.2: Based on Version 3, converted to two-claw design with 180° spacing
- Allows USB-C cable head to pass through
- Must be paired with "Male Part (Ball) Version 3"
Version 6 (Enlarged)
- Based on Version 5.2
- Added integrated rotatable base
- Supports adjustable orientation in any direction
- Must be paired with "Male Part (Ball) Version 3"
最终说明 | Final Remarks
中文
窝体版本3、4、5和6已达到设计预期，将作为DIY人体存在传感器的核心部件。敬请期待我的新项目！
English
Versions 3, 4, 5, and 6 of the socket have met design expectations and will serve as critical components in the DIY human presence sensor project. Stay tuned for my new project!