Raspberry Pi Display Case
by ftobler
Printable files (11)
-
stlraspiBplusCase_base.stl
253 Ko · 51 828 downloads
-
stlraspiBplusCase_top.stl
40 Ko · 51 293 downloads
-
stlraspiBplusCase_top_wo_display_logo.stl
58 Ko · 50 131 downloads
-
stlraspiBplusCase_top_wo_display.stl
30 Ko · 49 673 downloads
-
stlspacer.stl
14 Ko · 50 103 downloads
-
stlassembly.stl
312 Ko · 49 885 downloads
-
stlassembly2.stl
294 Ko · 49 593 downloads
-
stlraspiBplusCase_top_differentCutout.stl
40 Ko · 49 222 downloads
-
stlraspiBplusCase_top_extraTall.stl
49 Ko · 48 490 downloads
-
stlraspiBplusCase_top_differentCutout_extraTall.stl
49 Ko · 47 530 downloads
-
stlraspiBplusCase_base_w_sdSlot.stl
221 Ko · 46 759 downloads
Description
A simple display case for the Raspberry Pi 2 & 3 Model B. I used a 3.5inch touchscreen LCD, which is purchased from ebay. Link and guide is listed below.
The micro SD card is accessible from outside. A special feature is, that it is held in place, even when the spring loaded mechanism of the sd slot fails (which happened here).
The raspi is entirely passive cooled. I have not used a heat sink or a fan.
Do not print assembly.stl. I have three different top parts. I only used and printed that width the display. I used some weak glue to bind the parts together.
In case you need some changes to the model to fit your Display, there is a customizer
If this is not enough for you, feel free to send me a message :)
User-specified models:
raspiBplusCase_top_differentCutout.stl
raspiBplusCase_top_extraTall.stl
(I used the raspbian image)