Compact Pro 4th Axis Stabilizer
by ScottyMakesStuff
Printable files (22)
-
stl4AC_LegV4b.stl
328 Ko · 16 842 downloads
-
stl4AC_HandleConnectM6V2.stl
948 Ko · 16 812 downloads
-
stl4AC_GimbalSupportV3.stl
1.1 Mo · 16 816 downloads
-
stl4AC_SpringAdjustRightM6.stl
2.1 Mo · 16 757 downloads
-
stl4AC_CrossBarM6V2.stl
1009 Ko · 16 794 downloads
-
stl4AC_BoltRunnerM6BrassInsertV10.stl
1.6 Mo · 16 756 downloads
-
stl4AC_OsmoADPTR.stl
1.9 Mo · 16 782 downloads
-
stl4Ar2_HandleRemoteV4.stl
1.9 Mo · 16 715 downloads
-
stl4Ar2HandleM6V2.stl
1.9 Mo · 16 747 downloads
-
stl4Ar2_GimbalKnob_V3.stl
1.3 Mo · 16 738 downloads
-
stl4Ar2HandleKnobM6V2.stl
2.4 Mo · 16 718 downloads
-
stl4Ar2_SpringKnob_V8.stl
1.6 Mo · 16 729 downloads
-
stl4Ar2_DampeningKnobV6.stl
1.7 Mo · 16 684 downloads
-
stl4AC_HandleSideOnM6V2.stl
2.1 Mo · 16 745 downloads
-
stl4Ar2_DampenerDynamicV12_4mmShorter.stl
414 Ko · 16 719 downloads
-
stl4Ar2_DampenerStaticV12.stl
402 Ko · 16 703 downloads
-
stlSocket_M6.stl
1.6 Mo · 16 668 downloads
-
stl4AC_HandleRemoteSideOnV4.stl
2 Mo · 16 685 downloads
-
stl4Ar2_BottomArmV2.stl
1.6 Mo · 16 612 downloads
-
stl4Ar2_TopArm_R_V2.stl
1.7 Mo · 16 603 downloads
-
stl4AC_CrossBarSplitThread.stl
832 Ko · 16 169 downloads
-
stl4AC_CrossBarSplitHole.stl
677 Ko · 16 179 downloads
Description
The dreaded 'gimbal bob' will be a thing of the past with the silky smooth footage you'll get with the new Compact Pro Model 4th Axis Camera Stabilizer in single and dual handle!
- Completely Tool-less adjustments - make changes in seconds
- Adjustable Fluid Damping - from hard action to soft shots
- Load Adjuster to adapt to your rig
- Adjust in seconds from upright to mid height to briefcase mode
- Get buttery smooth footage from compact cameras!
- Only 23 Ounces (650grams) or for the dual handle it's 2.4 pounds (1.1kg)
- The dual handle also has a built in stand.
UPDATE: There's now a new two part bolt together crossbar for people with smaller printers. This uses 3 X M5 X 20 socket head bolts.
Here's all the YouTube videos covering these stabilizers:-
Features:- https://youtu.be/smD-RTGe4J4
Showreel:- https://youtu.be/YJ4jBCNqeLs
DIY Assembly:- https://youtu.be/rivhUJsmm-I
Change the Spring:- https://youtu.be/gBHZEe3udI8
I've also made an adaptor to fit the DJI Osmo to this stabilizer here:-
https://www.thingiverse.com/thing:2721489
The cameras in today's phones, action cams and small mirrorless systems can produce stunning footage. Add a compact gimbal and you come close to footage seen on much more expensive systems at a small fraction of the price.
But the one big detractor when taking moving shots with gimbals is the dreaded gimbal bob that can spoil what could otherwise be great footage. This bobbing motion can be minimised with the skill of the camera operator but on uneven ground or on longer takes you’ll find that without some form of 4th axis stabilization you’ll have z motion artifacts creeping into your footage.
My primary goal when designing the new Compact Pro Stabilizer was to achieve buttery smooth footage when shooting on gimbals with anything from gentle movement all the way to running full pace. And all this while being more Pro friendly.
The current crop of compact Z or 4th Axis stabilizers only work well at a normal smooth walking pace and develop a harmonic bounce when speeding up or when slowing down. Essentially, they balance but they don’t really dampen the bounce.
My already developed variable fluid damping cartridges in the full sized Pro 1 model solved this bounce but I wanted to make it even better.
So after extensive product development and testing I’m extremely proud to introduce the new Pro Model Compact 4th Axis Stabilizer.
The new design is a finely tuned piece of camera kit that glides effortlessly on 9 high quality bearings, it removes bounce with a new high-tech variable fluid damping cartridge and the geometry has been further optimised to give the best possible 4th axis motion reduction. I’m seriously chuffed at how good it works - it’s a major improvement in compact camera z axis stabilization! If you’re a content creator then this should definitely be in your kit bag.
The adjustable fluid damping inherited from the full size Pro 1 has been further improved with the addition of highly specialised synthetic shock absorbing fluid that can quickly adjust to take you from the softest motion to those running like crazy to keep up with your talent shots!
This kit include the two different payload adjustment springs - the 375 spring which suits more typical compact gimbal and camera rigs weighing from 7 ounces to 2 pounds (200g to 900g) and for heavier payloads the 371 spring goes from 1 to 3.8 pounds (500g to 1.7kg).
For pro use I wanted to be able to quickly change my rig on the go between shots with tool-less adjustments and when the shoot was over I wanted it to pack down small. I also wanted to expand the range of uses with modular add-ons such as a handle that takes the Zhiyun Remote Control.
The Compact Pro Kit has dual adjustable grips with a built in stand so you can put your stabilizer down between takes - if you’ve ever held a fully rigged Ronan up for any more than a few minutes you’ll know how much you wished for a built in stand to rest your arms! The kit also comes with all the necessary tools for changing springs or for fine tuning.
I’m unapologetically excited about this Compact Pro Stabilizer Kit as there’s nothing else out that stabilizes close to as well in as many different types of scenarios as this does. Now, I’m no pro camera operator by any stretch of the imagination and even with a dodgy knee I can get great results. I can’t wait to see what you guys produce with it!
You can check out my other designs here:-
https://www.thingiverse.com/ScottyMakesStuff/designs
You can see all my videos on my YouTube Channel, ScottyMakesStuff here:-
https://www.youtube.com/c/ScottyMakesStuff
https://twitter.com/ScottyMakesStuf
https://www.instagram.com/scottymakesstuff/