Mini CoreXY 3D Printer
by Bobbyofna
Printable files (49)
-
stlExtruder_Motor_Mount.STL
19.2 Mo · 1 554 downloads
-
stl
MRD_Corner_Bracket_Idler_Right_Top.STL
11.8 Mo · 1 531 downloads
-
stl
Spool_Holder.STL
11.7 Mo · 1 529 downloads
-
stl
Corner_Bracket_Idler_Right_Top.STL
11.2 Mo · 1 536 downloads
-
stl
Adjust_1.STL
4.8 Mo · 1 528 downloads
-
stl
Corner_Bracket_Idler_Left_Top.STL
12.7 Mo · 1 534 downloads
-
stl
Corner_Bracket_Idler_Left.STL
22.2 Mo · 1 535 downloads
-
stl
Home_Stopper.STL
8.1 Mo · 1 528 downloads
-
stl
Home_Stopper_2.STL
8.1 Mo · 1 534 downloads
-
stl
Adjust_2.STL
4.8 Mo · 1 524 downloads
-
stl
Corner_Bracket_Idler_Right.STL
41 Mo · 1 536 downloads
-
stl
Foot.STL
5.4 Mo · 1 527 downloads
-
stl
Corner_Bracket_Motor_Right.STL
27.1 Mo · 1 528 downloads
-
stl
Corner_Bracket_Bottom.STL
19.8 Mo · 1 544 downloads
-
stl
MRD_Corner_Bracket_Motor.STL
27.6 Mo · 1 533 downloads
-
stl
Corner_Bracket_Motor_Left.STL
27.1 Mo · 1 538 downloads
-
stl
MRD_Corner_Bracket_Idler_Right.STL
31.5 Mo · 1 536 downloads
-
stl
Corner_Bracket_Motor.STL
27.6 Mo · 1 531 downloads
-
stl
Belt_Holder.STL
17.3 Mo · 1 527 downloads
-
stl
Belt_Holder_2.STL
13.5 Mo · 1 535 downloads
-
stl
BLTouch_Mount_v2.STL
39.3 Mo · 1 531 downloads
-
stl
Hotend_Clamp.STL
10.5 Mo · 1 535 downloads
-
stl
Fan_Shroud_Mosquito.STL
40.1 Mo · 1 536 downloads
-
stl
Main_Mount_v2.STL
40.4 Mo · 1 533 downloads
-
stl
Mosquito_Mount_v2.STL
37.3 Mo · 1 528 downloads
-
stl
Fan_Shroud_Mosquito_v2.STL
41.2 Mo · 1 519 downloads
-
stl
BLTouch_Mount_2_v2.STL
23.3 Mo · 1 522 downloads
-
stl
Y_Main_Mount.STL
46.4 Mo · 1 534 downloads
-
stl
Y_Top_Mount.STL
14.8 Mo · 1 523 downloads
-
stl
New_Bearing_End.STL
7.3 Mo · 1 524 downloads
-
stl
Z_Upper_Pulley_Mount.STL
11.5 Mo · 1 530 downloads
-
stl
MRD_Z_Mount_Pulleys.STL
14.4 Mo · 1 544 downloads
-
stl
New_Bearing_Mount.STL
13.5 Mo · 1 536 downloads
-
stl
MRD_Z_Upper_Bracket.STL
45.2 Mo · 1 535 downloads
-
stl
MRD_Z_Upper_Bracket_Support.STL
30.3 Mo · 1 538 downloads
-
stl
New_Bearing_Arm.STL
8.5 Mo · 1 533 downloads
-
stl
Z_Mount.STL
58.5 Mo · 1 541 downloads
-
stl
MRD_Z_Lower_Bracket.STL
50.6 Mo · 1 539 downloads
-
stl
Z_Upper_Bracket.STL
45.3 Mo · 1 537 downloads
-
stl
Belt_Clamp.STL
4.8 Mo · 1 528 downloads
-
stl
Z_Upper_Bracket_Support.STL
30.3 Mo · 1 524 downloads
-
stl
Z_Bed_Mount_v1.STL
18.2 Mo · 1 527 downloads
-
stl
MRD_Z_Upper_Pulley_Mount.STL
11.4 Mo · 1 533 downloads
-
stl
MRD_Z_Lower_Bracket_Support.STL
44.2 Mo · 1 539 downloads
-
stl
Z_Lower_Bracket.STL
50.7 Mo · 1 536 downloads
-
stl
Z_Mount_Pulleys.STL
14.4 Mo · 1 531 downloads
-
stl
Motor_Extender.STL
10 Mo · 1 528 downloads
-
stl
Z_Lower_Bracket_Support.STL
44.2 Mo · 1 524 downloads
-
stl
MRD_Z_Mount.STL
58.5 Mo · 1 541 downloads
Description
BIG UPDATE.....
After over 3 years of developing this 3D printer, I am finally satisfied enough with the design to say that it is complete!!! Not only that, but I have fully built, assembled and wired this final iteration! The only thing left for me to finish is to update my old configuration files to work with the latest version of RepRapFirmware and to try to get just a few high quality prints out of the printer. I know many people have reached out to me and are eager about having me update all of the files as soon as possible so that they can build my design themselves, however, not until I complete these last two steps will I finally update everything on this page. That update will include all of the latest STL and STEP files, the latest BOM, all of the latest configuration files, my Cura profiles, and more. As I said, I have been working on this design for over 3 years now. As such, this printer is my baby. It's the biggest home engineering project I've ever taken on, and probably the best engineering design work I have ever done. Therefore, I want to be the first person to use my own design I've worked so hard on. If you couldn't tell, the design of the printer as a whole is not only unique, but it has also taken on a fairly radical feature that is non existant in any 3D printer in the world. For that reason as well, I want to make sure that my final design actually works and works quite well before finally releasing the design to the world. As of right now my schedule for the upcoming few weeks is fairly busy. However, I fully expect to be finished configuring and tuning the printer around the first week of October (2021) at which I will then fully release my design here on Thingiverse!
INFO TO BE UPDATED WHEN THE DESIGN IS FULLY RELEASED AT THE BEGINNING OF OCTOBER...
This is a Mini CoreXY 3D printer designed to be high end, relatively cheap, and use a bunch of spare parts I had laying around. This printer features...
-- A compact, sturdy, and portable design
-- CoreXY kinematics
-- Sensorless homing
-- Dual Z axis' (levels the X axis)
-- BLTouch leveling probe
-- Compatible with any E3D hotend or the Mosquito Hotend
For the electronics and firmware, I decided to go with...
-- Duet 2 Wifi 32 Bit Controller
-- ReprapFirmware
-- 7" Paneldue Touchscreen
-- 24v Power supply
-- Custom portable electronics enclosure
Some other things featured my build that aren't specific to this design are...
-- Bondtech extruder
-- 0.9 Deg X & Y Nema 17 stepper motors