DSO 138 Case
by Stammchiller
Printable files (8)
-
stlstand.stl
298 Ko · 4 396 downloads
-
stlplus-minus-pushbutton.stl
1.3 Mo · 4 401 downloads
-
stlBackplate.stl
746 Ko · 4 412 downloads
-
stlCasetop.stl
6.3 Mo · 4 465 downloads
-
stlCasetop_oscilloscope.stl
6.7 Mo · 4 454 downloads
-
stepDSO138_Case_1.stp
1.7 Mo · 4 393 downloads
-
stlpushbutton.stl
141 Ko · 4 391 downloads
-
stlswitch.stl
3 Ko · 4 398 downloads
Description
Hey,
I've made a case for my DSO 138 oszilloskope. For the design I used a model for that board I found on the internet. It fits good but it is recommended to loosen the glue at the back of the LC Display and put some foam behind. As a second recomendation: use the ironing function for the top layer in your slicing programm. That will fix the gaps in letters.
I uploade a slightly fixed Version with a "reset" and corrected the Trigged from the PCB with Triggered.
The trigger LED can be easy desoldered from the PCB and resoldered with some wires to it.
To screw the backplate you can use simple wood screws with a max. lengh of 30mm
Two Top Cases:
with "Ozilloskop" named Casetop
with "Oscilloscope" named Casetop_oscilloscope
Have Fun!