Amazon Echo Dot (3rd Gen.) variable Mount
by Sozpaed
Printable files (6)
-
stlEchoDot3Halterung_Teil_Stecker.stl
29 Ko · 2 134 downloads
-
stlEchoDot3Halterung_Teil_Traeger.stl
1.2 Mo · 2 133 downloads
-
stlEchoDot3Halterung_Teil_Wand_2.stl
86 Ko · 2 126 downloads
-
stlEchoDot3Halterung_Teil_Wand.stl
101 Ko · 2 124 downloads
-
stlEchoDot3_Traeger_Ring.stl
1 Mo · 2 120 downloads
-
stlEchoDot3_Traeger_Rest.stl
450 Ko · 2 114 downloads
Description
I was looking for a mount for my Echo Dot 3rd gen. After I printed tgj 's Mount, I noticed two things:
- The holders for the dot were too filigree for me personally.
- In older sockets the weight was not held alone by the socket, so that the dot pulled the plug out of the wall.
Therefore I made two changes:
- I have designed stronger brackets.
- I changed the mount so that you can use your Dot 3 vertically and horizontally now. Simply by using three different M3 screws and nuts.
Maybe I will design a cover for the cable. I have left it so far, because I personally have no problem with it ;-)
Note: If you use the mount vertically, you can rotate the dot both upwards and downwards. Lateral is certainly also possible^^
Note: This is designed to fit the German power supply. Just measure your plugs and compare it with the STL.