Raspberry Pi 19" server mount
by DavidKa
Printable files (8)
-
stl3_BlendeR.stl
17 Ko · 9 529 downloads
-
stl1_RPiBlende.stl
81 Ko · 9 538 downloads
-
stl5_BlendeL.stl
24 Ko · 9 496 downloads
-
stl6_LEDHalter.stl
55 Ko · 9 485 downloads
-
stl8_SSDSATABracket.stl
31 Ko · 9 464 downloads
-
stl2_DisplayBlende.stl
54 Ko · 9 472 downloads
-
stl7_RPiSSD.stl
92 Ko · 9 441 downloads
-
stl4_RaspiLogo.stl
1.3 Mo · 9 470 downloads
Description
You can put 2 Raspberrys with OLED Stats Display, SSD and a Power Supply Unit in a 19" 1U 150mm Server Tray, or just 3 Raspberrys.
Instructions
Part 1 and 2 will be glued together. Screw the Raspberry Pi in part 1.
Part 1 and 2 will be screwed to the tray.
If you want to install a SSD you need part 7, aswell as part 8 for the USB to SATA adapter.
Glue part 3 and 5 to part 4. Mount the LEDs to part 6 and screw it in to part 3 and 5.
The OLED is connected via i2c to the GPIO of the Raspberry Pi.
There are 2 leds for ACT and PWR and a button to shut down the Pi.
Links
19" tray:
https://www.amazon.de/Intellinet-Fachboden-Frontmontage-Profilschienen-712491/dp/B00NW49LE2
Power Supply:
https://www.amazon.de/Mean-LRS-50-5-Netzteil-Ultraflach-Einbau-Metallgeh%C3%A4use/dp/B07G2FD4K2/
USB SATA Adapter:
https://www.amazon.de/Renkforce-Raspberry-USB-SATA-KONVERTER/dp/B0107X4U0A/
OLED Display:
https://www.amazon.de/AZDelivery-Display-Arduino-Raspberry-gratis/dp/B074N9VLZX/
Software for the OLED:
https://github.com/David-Ka/Pi_stats_OLED