Jet engine display case
by Mindcraft-3D
Printable files (17)
-
stepfull_stand_.step
694 Ko · 1 527 downloads
-
stl
full_stand.stl
420 Ko · 1 631 downloads
-
stl
Stand_arm_back.stl
192 Ko · 1 577 downloads
-
stl
Stand_arm_front_.stl
201 Ko · 1 564 downloads
-
stl
stand.stl
281 Ko · 1 557 downloads
-
step
full_case_.step
208 Ko · 1 581 downloads
-
stl
case_front.stl
440 Ko · 1 657 downloads
-
stl
case_back.stl
692 Ko · 1 624 downloads
-
stl
cowling.stl
383 Ko · 1 634 downloads
-
stlcase_front_A.stl
247 Ko · 775 downloads
-
stlcase_front__B.stl
241 Ko · 770 downloads
-
stlcase_back_A.stl
438 Ko · 781 downloads
-
stlcase_back_B.stl
464 Ko · 772 downloads
-
stlstand_base_B_.stl
201 Ko · 753 downloads
-
stlstand_base_A_.stl
165 Ko · 752 downloads
-
stlcowling_A.stl
795 Ko · 185 downloads
-
stlcowling_B.stl
819 Ko · 188 downloads
Description
Designed A case for the CATIAV5FTW Jet Engine. The engine is held in place with friction fit and can very easy be removed, . I used the original stand but made A boolean cut with the case and added 2 arms to prevent the case from rolling on its side.I printed the arms separate then glued them to the base but included the complete stand if you would rather use bracing.I also printed the case in 3 pieces then glued,primed, sanded and painted the whole case with A rattle can paint and primer