Encoder Knob
by V0lD
Printable files (12)
-
stlRotary_Encoder_Knob_v3.stl
771 Ko · 2 802 downloads
-
stl
30mm.stl
1.5 Mo · 2 236 downloads
-
stl
25mm.stl
1.7 Mo · 2 282 downloads
-
stl
16mm.stl
2.1 Mo · 2 818 downloads
-
stl30mm_3mm.stl
1.5 Mo · 2 171 downloads
-
stl25mm_3mm.stl
1.6 Mo · 2 122 downloads
-
stl20mm.stl
1.6 Mo · 1 603 downloads
-
stl16mm_3mm.stl
2.1 Mo · 2 722 downloads
-
stl30mm_3mm_D.stl
1.5 Mo · 1 911 downloads
-
stl25mm_3mm_D.stl
1.6 Mo · 1 914 downloads
-
stl20mm_D.stl
1.6 Mo · 1 629 downloads
-
stl16mm_3mm_D.stl
2.1 Mo · 2 607 downloads
Description
Description
EC11 Rotary Encoder knurled knob
6mm inner diameter
Updates
08.09.2022
Added 20mm version.
22.03.2021
Added variations for D shaft encoders.
18.03.2020
Added a new revised design in 3 diameters: 16mm, 25mm and 30mm. All of them are 16mm tall.
Sidenote
The knob pictured above was printed at a 0.28 layer height, bottom part on the bed, and it had the top part sanded down.
If surface finish doesnt matter much to you, I would suggest printing it with it's top facing the bed, this way you wouldnt need any supports.