Etherfields Token Storage Remix
by Gemelli23
Printable files (9)
-
stlEtherfields_Smaller_TokenBox.stl
343 Ko · 291 downloads
-
stlEtherfields_Smaller_TokenLid_SeeThrough.stl
923 Ko · 299 downloads
-
stl
Etherfields_Smaller_TokenLid_Opaque.stl
862 Ko · 296 downloads
-
stl
Etherfields_Stones_OpenBox.stl
77 Ko · 293 downloads
-
stl
Etherfields_Stones_wLid.stl
989 Ko · 297 downloads
-
stl
Etherfields_Reaper_minis.stl
1.5 Mo · 302 downloads
-
stl
Etherfields_Bits_Tray.stl
782 Ko · 298 downloads
-
stl
Etherfields_Signs_9wells.stl
29 Ko · 303 downloads
-
stl
Etherfields_Signs_4wells.stl
13 Ko · 307 downloads
Description
I wanted to create a slightly different version of the excellent Etherfields Token Trays by Rockmanlives: https://www.thingiverse.com/thing:4654155
The changes I made were to his design were as follows:
- Combined the two cardboard token holders into a single tray (and removed the monster tokens, since I'm using the Creatures of Etherfields minis and didn't need them taking up space)
- Added a simple token lid for the token tray -- not really necessary, but I kept losing bits on the way into/out of the box
- Changed the Sign token storage to a set of simple rails with triangular wells -- primarily because my print bed is too small to print Rockman's version
- Added storage boxes for the stones and plastic bits (thank you to Sislar for his excellent parameterized storage box system: https://www.thingiverse.com/thing:3372739)
My storage setup is as follows:
1) Smaller well in the corner of the insert has the stone-holder on the bottom, then the Reaper mini holder above that (I use the stone holder without a lid, but have provided an option for a lidded version
2) Larger well on the insert side has the bits tray lying flat on the bottom, then the five Do Not Open decks on their sides, sitting long-edge down on the box
3) Plastic insert with boards and masks layered over everything as normal
4) Foam sheet (~13mm) above the plastic insert with cutouts for the lidded token tray and sign-token holders (you need one of the four-well models and two of the nine-well models to hold everything)
5) Board, manuals, etc. over that
===========================
UPDATES
11/30: I realized that the see-through logo on the token box won't suit everyone's tastes due to the cutouts on the D and R -- so added an opaque version as a WIP