Push Block
by CliffGlanz
Printable files (7)
-
stlMainBody.stl
79 Ko · 2 369 downloads
-
stl
Handle.stl
46 Ko · 2 323 downloads
-
stl
CenterLeg.stl
12 Ko · 2 302 downloads
-
stl
Leg.stl
45 Ko · 2 306 downloads
-
stl
ThumbScrew.stl
79 Ko · 2 307 downloads
-
stl
OvalWasher.stl
21 Ko · 2 297 downloads
-
stlPushHeal.stl
15 Ko · 1 734 downloads
Description
3D Push Block for wood working.
Print all parts. Only the Main Body need supports in the hex area. All other parts print with no supports if oriented properly.
Glue 1/4"-20 nuts into the hex openings on the main body & skinny legs. I used Hillman brand nuts and screws purchased at HomeDepot. The nuts are 0.185" thick. Glue something very grippy to the bottom of the Center Legs and skinny legs. I used Drywall sanding pads and super glue.
Main Body = 1
Center Leg=1
Leg=2
Handle=1
Oval Washer=4
ThumbScrew=2
Push Heal = Optional
Print Settings:
2 Walls
2 Top
2 Bottom
20 % infill