Led Hexagonal Panels
by beerman_uk
Printable files (13)
-
stlBottom_Left.stl
70 Ko · 1 450 downloads
-
stlLeft_2.stl
64 Ko · 1 437 downloads
-
stlBottom_Right.stl
134 Ko · 1 434 downloads
-
stlMiddle_Right.stl
92 Ko · 1 435 downloads
-
stlRight_2.stl
116 Ko · 1 429 downloads
-
stlLeft_1.stl
63 Ko · 1 429 downloads
-
stlMiddle.stl
75 Ko · 1 429 downloads
-
stlMiddle_Left.stl
79 Ko · 1 432 downloads
-
stlRight_1.stl
105 Ko · 1 431 downloads
-
stlTop_Left.stl
92 Ko · 1 429 downloads
-
stlWemos_case.stl
16 Ko · 1 469 downloads
-
stlTop_Right.stl
204 Ko · 1 427 downloads
-
stlLedPanelLid1mm.stl
1 Ko · 1 445 downloads
Description
I took BigJim36's design and modded it to my needs. I've added a tab which not only adds a screw hole to mount it cleanly but adds a way to cable tie to the wires out of the way. I also moved holes to where I need them.
I've have added new piece to put the wemos d1 mini I used for the controller. The wemos friction fits on the inside.
I used 27 leds per panel (60leds per meter), you can probably fit 28 in each panel but I wanted 11 panels. A 5m strip had 3 leds left over.
Using a 5v 20amp power supply which I created a cover for here: https://www.thingiverse.com/thing:4945757
The code I used was from here: https://github.com/NimmLor/esp8266-nanoleaf-webserver
These are very helpful when wiring:
https://www.amazon.co.uk/SRunDe-Connector-Controller-Adapter-WS2812B/dp/B08TLZBCLC/
LEDs used:
https://www.ebay.co.uk/itm/124295445848
Power supply used:
https://www.ebay.co.uk/itm/384284198672
PLA used was Sunlu Black PLA+ and White PLA+