Modular desk clock
by hellgy
Printable files (16)
-
stlShape_flat.stl
209 Ko · 339 downloads
-
stlShape_Hexa.stl
177 Ko · 339 downloads
-
stlShape_corner.stl
204 Ko · 332 downloads
-
stlShape_flat_back.stl
1.3 Mo · 319 downloads
-
stlShape_corner_back.stl
1.3 Mo · 317 downloads
-
stlShape_Hexa_back.stl
1.7 Mo · 321 downloads
-
stlFace_dash.stl
234 Ko · 318 downloads
-
stlFace_ho_no.stl
282 Ko · 304 downloads
-
stlFace_dots.stl
359 Ko · 314 downloads
-
stlFace_nope.stl
843 Ko · 298 downloads
-
stlFace_numbers.stl
1005 Ko · 364 downloads
-
stlHexa_hands.stl
56 Ko · 308 downloads
-
stlbiboutz.stl
835 Ko · 323 downloads
-
stlLine_hands.stl
101 Ko · 323 downloads
-
stlPointy_hands.stl
136 Ko · 334 downloads
-
stlRound_hands.stl
123 Ko · 316 downloads
Description
What time is it? It's nope o'clock !
A small & simple clock for your desk: 3 blocks, 5 faces, 4 hands: 60 variations !
Select the parts and create your own clock !
- 3 blocks : corner, flat or hexa
- 5 faces : dots, dashes, numbers, “ho no” or “it's nope o'clock”
- 4 hands sets : round, pointy, line or hexa
- one extra part to hide the center of the clock : the biboutz
Mix and match the parts, use several colors or not, and enjoy your desk clock :)
Recommendations for printing
- use 0.05mm resolution for clock hands, biboutz and the face with numbers
- use 0.20mm for all the other parts
- don't forget to add supports for the blocks
Gravity
You'll notice gravity exists on earth and therefore, you'll need to add additional weight on the “corner” block for that it stays in place. there are 2 spaces in the block where you can add some coins to add some weight. Tested with two 50cents coins, it can also help you to store money for emergencies at the coffee machine.
Closing the clock
Secure the clock back with a little bit of masking tape around the rods to make them a little bit thicker and stay in place.
Mechanism
Use the quartz clock mechanism with a small shaft ( 55x55x 13mm) like this one : https://www.amazon.fr/gp/product/B08SJDZHLT
Font
If you like the font I used for the face, you can download it here for free (Yes, I made it)
https://weblog.redisdead.net/main/post/2018/08/01/Caturigas-une-fonte-super-fine-et-mega-grasse