Gamecube Shell Complete Console, Printer Friendly
by wiseprints206
Printable files (21)
-
objavport_final.obj
172 Mo · 301 downloads
-
obj
gamecube_back_fixed.obj
174.1 Mo · 282 downloads
-
obj
gamecube_base_final.obj
6.5 Mo · 298 downloads
-
obj
gamecube_BBPort_final.obj
127.8 Mo · 286 downloads
-
obj
gamecube_controller_plate_final.obj
68.6 Mo · 319 downloads
-
obj
gamecube_eject_large_pins.obj
22.1 Mo · 281 downloads
-
obj
gamecube_eject_original_style.obj
24.3 Mo · 278 downloads
-
obj
gamecube_feet_back.obj
3 Ko · 273 downloads
-
obj
gamecube_feet_front.obj
11 Ko · 275 downloads
-
obj
gamecube_lid_final.obj
2.7 Mo · 282 downloads
-
obj
gamecube_pwr_final.obj
105 Mo · 287 downloads
-
obj
gamecube_reset_sw_final_colormatch.obj
356 Ko · 279 downloads
-
obj
gamecube_serial_port_fixed.obj
109.6 Mo · 285 downloads
-
obj
gamecube_snapin_vent_final.obj
419 Ko · 277 downloads
-
obj
Gamecube_topshell_ventsnap_final.obj
3.6 Mo · 290 downloads
-
obj
handle_final_final.obj
60.4 Mo · 279 downloads
-
obj
hispeed_port_1.2.obj
233 Ko · 283 downloads
-
obj
lid_final_1.2.obj
2.5 Mo · 279 downloads
-
obj
Logo_jewel_final_2.obj
1.7 Mo · 292 downloads
-
step
jewel_final_STEP.step
1.8 Mo · 282 downloads
-
obj
original_rectangle_vent.obj
38 Ko · 279 downloads
Description
I started a YouTube channel! Check it out at: https://www.youtube.com/@Wiseprints206
That's right, any GameCube color!This is a complete Gamecube shell, designed and modified to be faithful to the original Gamecube, while also being 3d printer friendly. I did a whole load of printing and testing, I cleaned up and refined almost every piece using fusion and meshmixer. Each file should be completely interchangeable with an OEM GameCube, and print reasonably well without photo artifacts from scans.
These files are a mix of pieces I created, along with modified scans found here:
https://www.thingiverse.com/thing:5160350
https://www.thingiverse.com/thing:5364536/files
Some of the file changes:
-Durable snap on bottom covers that don't instantly snap
-Added Hi speed port cover to the files
-Top jewel sized correctly for OEM Gamecube and model refined for printing
-Printed shell is now compatible with Gameboy Advance adapter
-Snap-in top buttons beefed up so they don't snap off
-Touch up tolerances for back plate
-Fix screw holes on bottom
-Snap in/replaceable side vents
Changes that make this shell not truly OEM:
-Vents snap out
-The snap in vents are hex pattern and have my logo etched in them
-rectangle vents will be snap in as well very soon
-Bottom of shell has my logo and credit to tesser where the Gamecube warning and information stickers usually are (note: bottom is now cleaner than the photos show, files have been refined since)
-I do not have a jewel created yet that has the original "Gamecube" text, just blank or my logo
-QR code to this listing on back of jewel
Things missing or not modeled:
-Springs
-Internal button mechanisms (these can be taken from your existing Gamecube)
For a nice glossy finish on the jewel, use a whambam plate and place it face down. For clean support removal, I would recommend the pla with petg support interface trick, or bambu support interface material.
I will likely update this listing in the coming weeks if I find any flaws or things missing. Please leave a comment if I missed one of the files and I will upload it, it is very possible I left one out of the final folder.
Also, I started a YouTube channel, check it out at: https://www.youtube.com/@Wiseprints206