Small Risers - adjustable support
by Groundwalker
Printable files (8)
-
stlRiser_25_-_Riser_a.STL
4.8 Mo · 852 downloads
-
stlRiser_25_-_Riser_b.STL
10 Mo · 835 downloads
-
stlRiser_50_-_Riser_a.STL
7.7 Mo · 772 downloads
-
stlRiser_50_-_Riser_b.STL
13 Mo · 780 downloads
-
stlRiser_75_-_Riser_a.STL
10.7 Mo · 743 downloads
-
stlRiser_75_-_Riser_b.STL
15.8 Mo · 724 downloads
-
stlRiser_100_-_Riser_a.STL
13.2 Mo · 715 downloads
-
stlRiser_100_-_Riser_b.STL
18 Mo · 716 downloads
Description
I loved this idea and thought I would expand upon it with 4 new sizes
Suitable for holding a GPU within a PC case in a smaller form factor.
Sized perfectly for various other uses including Dnd or TTRPGs
Sizes (height)
- 25-35mm
- 50-80mm
- 75-130mm
- 100-175mm
Final height is an approximate maximum
Minimum Height is exact.
New Features
- Added grips for twisting
- Hollowed centre for filament savings
- Standardised Height (somewhat)
- Scalable (up to 150% before it gets sloppy)
- Less twists required (bigger thread)
- All threads match (M42x3mm 20dia roughly)
- Base is 30mm diametre
Probably compatible with each other amongst the 4 sizes. Not sure why you'd want to but you can mix and match e.g. 100 a and 50 b would probably work. All thread is the same across the board.