Manually Refresh-able Braille
by pyrophreek
Printable files (6)
-
stl3D_printed_Braille_Basic_design_Actuation_bar_A.stl
11 Ko · 1 989 downloads
-
stl3D_printed_Braille_Basic_design_Actuation_bar_B.stl
14 Ko · 1 967 downloads
-
stl3D_printed_Braille_Basic_design.stl
122 Ko · 1 977 downloads
-
stl5_character_base.stl
783 Ko · 1 926 downloads
-
stlBraillle_pins.stl
268 Ko · 1 968 downloads
-
stl6_pins_flat.stl
335 Ko · 1 923 downloads
Description
Part of a Senior Capstone design project to make a low cost Braille display.
This is an early prototype of the control mechanism, but still useful to demonstrate the idea, or play with.
Files are 1:1 for standard Braille, but this is very difficult to print.
Jumbo Braille is 1.3:1 and prints ok.
2:1 prints very well, but is not a standard Braille size.
Original idea for control mechanism from:
http://www.kscitech.com/BBT/Slider_diagram1.jpg
