Mobius Case
by oidan
1 / 8
Printable files (3)
Description
I designed this to slice nicely with cura and a printer with 0.4mm nozzle at 0.2mm layer height. Print without support.
It is confirmed working with the B and C lens, I have not tested the A lens yet. Will fit the ZMR bobbins spacing.
Secured by one 20mm M3 screw (hold the two parts together and tap the thread into the plastic with the screw). Add some foam tape to the inside top and your good to go.
Check the video for more info. Enjoy :)
https://youtu.be/yf7kNTewlxU