3D Printable Jet Engine
por Catiav5ftw
Archivos imprimibles (44)
-
stlStand.stl
661 Ko · 12 404 descargas
-
stl
Stand_-_7mm_Shrink_to_Fit_Ultimaker.stl
4.6 Mo · 576 196 descargas
-
stl
Stand_-_Cut_in_Half_-_Connector.stl
118 Ko · 575 676 descargas
-
stl
Stand_-_Cut_in_Half_-_Part_1.stl
290 Ko · 572 070 descargas
-
stl
Stand_-_Cut_in_Half_-_Part_2.stl
2.9 Mo · 575 343 descargas
-
stlLP_Spool_Connector_Rev_B.stl
2 Ko · 12 252 descargas
-
stlSpinner_Tip_Rev_A.stl
17 Ko · 12 221 descargas
-
stl
Spinner_Cone.stl
295 Ko · 12 053 descargas
-
stlFlat_Stripe_Rev_B.stl
87 Ko · 11 922 descargas
-
stl
Fan_Rev_B.stl
10.2 Mo · 13 015 descargas
-
stlFan_Casing.stl
1.8 Mo · 12 240 descargas
-
stl
Fan_Stator_Casing_and_Suppport_Rev_B.stl
10.4 Mo · 12 296 descargas
-
stl
HP_Core_Casing_Rev_A.stl
5.5 Mo · 12 016 descargas
-
stlCombustion_and_HPT_Casing_Rev_B.stl
1.8 Mo · 12 105 descargas
-
stlLPT_Casing.stl
1.8 Mo · 11 981 descargas
-
stl
HP_Spool.stl
1.5 Mo · 11 981 descargas
-
stlHPC_Stator_Stage_1_Rev_B.stl
1.2 Mo · 11 842 descargas
-
stl
HPC_Stator_Stage_2_Rev_B.stl
2.4 Mo · 11 694 descargas
-
stl
HPC_Stator_Stage_3_Rev_B.stl
2.3 Mo · 11 650 descargas
-
stlHPC_Stator_Stage_4_Rev_B.stl
2.5 Mo · 11 766 descargas
-
stlHPC_Stator_Stage_5_Rev_B.stl
2.6 Mo · 11 735 descargas
-
stlHPC_Stage_1_Rev_B.stl
2.4 Mo · 12 060 descargas
-
stlHPC_Stage_2_Rev_B.stl
2.3 Mo · 11 855 descargas
-
stl
HPC_Stage_3_Rev_B.stl
2.2 Mo · 11 718 descargas
-
stlHPC_Stage_4_Rev_B.stl
2.2 Mo · 11 918 descargas
-
stl
HPC_Stage_5_Rev_B.stl
1.4 Mo · 10 403 descargas
-
stlCombustion_Lining_Rev_B.stl
5.1 Mo · 12 170 descargas
-
stlFuel_Injector_No_Supports.stl
272 Ko · 11 843 descargas
-
stlSwirl_Dome_Plate_Rev_A.stl
471 Ko · 11 925 descargas
-
stl
HPT_Rev_B.stl
3.4 Mo · 12 088 descargas
-
stl
LP_Spool_FWD_Rev_A.stl
405 Ko · 12 036 descargas
-
stl
LP_Spool_AFT_Rev_B.stl
959 Ko · 12 017 descargas
-
stl
LPT_Spool.stl
939 Ko · 12 040 descargas
-
stl
LPT_Stator_Stage_1_Rev_B.stl
3.5 Mo · 11 959 descargas
-
stl
LPT_Stator_Stage_2_Rev_B.stl
3.3 Mo · 11 812 descargas
-
stl
LPT_Stator_Stage_3_Rev_B.stl
1.8 Mo · 11 809 descargas
-
stl
LPT_Stator_Stage_4_Rev_B.stl
3.2 Mo · 11 877 descargas
-
stl
LPT_Stage_1_Rev_B.stl
5 Mo · 11 908 descargas
-
stl
LPT_Stage_2_Rev_B.stl
4.9 Mo · 11 830 descargas
-
stlLPT_Stage_3_Rev_B.stl
5 Mo · 12 041 descargas
-
stl
LPT_Stage_4_Rev_B.stl
5.1 Mo · 11 867 descargas
-
stl
Nozzle_Section_Rev_B.stl
5.9 Mo · 12 266 descargas
-
stl
Nozzle_Cone.stl
70 Ko · 12 060 descargas
-
stl
Mixer_Rev_B.stl
13.7 Mo · 12 603 descargas
Descripción
A cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there's some resemblance there... Since originally uploading this in 2016, the popularity of this model has grown far beyond expectations. The model has appeared in numerous publications, additive manufacturing expos/conferences, and is (for better or worse) being made and sold by a number of 3rd parties. However, rest assured that this is one of the official sources for this model. A bunch of remixes of this engine are out there, mostly here in Thingiverse at the moment, if you are so inclined.
I've tweaked several parts that originally had custom supports. These supports worked fine for some printers/filaments/slicers but not for others. So I redesigned those parts so there are no supports required. With that said, certain parts (fan stator casing, for example) have typical overhangs that still require normal supports that you'll need to apply in your slicer.
Each part was designed with a specific printing orientation in mind (see "Individual Components with Orientations.zip" for pictures). Due to the concentric fit of many of the components, the order that parts are assembled is very important. I uploaded a diagram with labels to all parts for reference. Pay special attention to the orientation of the compressor stages so as not to install them backwards. Multiple assembly videos for this model are available on YouTube, just search for "3d printable jet engine assembly guide".
Due to popular demand, I uploaded unsectioned, full-revolution versions of parts that had sections cut away (casings and stators, mostly). These all still contain the old custom supports and are contained in "Unsectioned Parts With Supports.zip".
Please refer to the Bill of Materials (BOM) to keep track of what to print.
======================================================================
The required fasteners (screws, washers, and nuts) and ball bearings are listed below. However, to make your life easier, Bambu Lab has created a hardware kit that includes these components: Jet Engine Model Components Kit - 006
- Metric machine screw, allen socket cap, 2.5mm x 0.45mm x 10mm (QTY 100)
- Metric flat washer, 2.5mm (QTY 200)
- Metric hex nut, 2.5mm x 0.45mm (QTY 100)
- 6204 open ball bearing 20x47x14 (QTY 2)
- 6003 open ball bearing 17x35x10 (QTY 2)
Disclaimer: The hardware kit link is an affiliate link, so I will get a small commission when you click the link and purchase.
======================================================================
Be very mindful when gluing parts together to make sure they are perpendicular to the engine rotation axis, especially the compressor and turbine stages. Also, make sure your printer axes are as perpendicular as possible; otherwise, the engine will wobble and scrape as it spins. I recommend dry fitting and temporarily assembling parts to verify everything before committing with gluing. I have confirmed with multiple builds that a properly printed and assembled engine will not have any rubbing/friction as it spins.
Good luck and happy printing!