Screw Caps
por 3DPRINTINGWORLD
Archivos imprimibles (6)
-
stlSCREW_CAP_M4_KNURLED.stl
276 Ko · 6 114 descargas
-
stlSCREW_CAP_M4_LOBED.stl
249 Ko · 5 988 descargas
-
stlSCREW_CAP_M3_LOBED.stl
249 Ko · 6 000 descargas
-
stlSCREW_CAP_M3_KNURLED.stl
285 Ko · 6 122 descargas
-
stlSCREW_CAP_M3_WINGED.stl
1 Mo · 5 914 descargas
-
stlSCREW_CAP_M4_WINGED.stl
1.1 Mo · 5 919 descargas
Descripción
Screw Caps
These caps press on the head of Socket Head Cap Screws. There are three designs; knurled, lobed, and winged for either a M3 or M4 screw. Use a hammer, c-clamp, vice, or arbor press to press the caps on the head of the screw. The press needs to be between .005-.01" to work properly. Print one out and test it before you print out a bunch of them. If the fit is not correct scale the .stl slightly in your slicer to correct it.