20" Ring Light
por CWeb_The_Gingineer
Archivos imprimibles (7)
-
stlStd_20inRingLight.STL
67 Ko · 2 753 descargas
-
stlNut.STL
3.3 Mo · 2 724 descargas
-
stlScrew.STL
5.3 Mo · 2 725 descargas
-
stlBase_20inRingLight.STL
10.3 Mo · 2 757 descargas
-
stlHinge_NutKnob.STL
13.1 Mo · 2 729 descargas
-
stlHinge_Big.STL
36.9 Mo · 2 760 descargas
-
stlHinge_Small.STL
58.2 Mo · 2 760 descargas
Descripción
My wife wanted to purchase one of these online to improve the lighting when she does eyelash extensions, takes pictures of the kids, makes videos for Instagram, etc. I had some LED light strips, an AC adapter, and a spare light stand, so I offered to try and design one. I think it came out pretty well. The .STLs are some what high resolution so fitting everything together should come easy. The ring needs 9 segments to be complete. I epoxied the ring together and applied some epoxy to the light strip to keep them in place as the manufactures adhesive begins to fail. I had a random nut and bot I used for the hinge. I also modeled a Bolt/Nut set that you can try to print and put together. I haven't tested them, but they are close to the right size (Not the same threads). So if anything, you could print them and head to the hardware store to find the same nut and bot.