Programable Cryptex
por richards
Archivos imprimibles (20)
-
stlcryptex_end.stl
819 Ko · 10 750 descargas
-
stlcryptex_core_tube.stl
170 Ko · 10 809 descargas
-
stlcryptex_centeral_support.stl
43 Ko · 10 719 descargas
-
stlcryptex_spacer_ring.stl
42 Ko · 10 629 descargas
-
stlcryptex_spacer_lock.stl
45 Ko · 10 581 descargas
-
stlcryptex_ring1.stl
418 Ko · 10 669 descargas
-
stlcryptex_assembly.stl
3.1 Mo · 10 305 descargas
-
stlcryptex_ring1_x5.stl
2 Mo · 10 383 descargas
-
stlcryptex_spacer_ring_x5.stl
192 Ko · 10 304 descargas
-
stlcryptex_skull_end.stl
1 Mo · 10 311 descargas
-
stlcryptex_ring2.stl
190 Ko · 10 552 descargas
-
stlcryptex_ring2_x5.stl
902 Ko · 10 344 descargas
-
stlcryptex_ring2_ns.stl
180 Ko · 10 471 descargas
-
stlcryptex_spacer_ring_inlay.stl
57 Ko · 10 328 descargas
-
stlcryptex_spacer_lock_inlay.stl
39 Ko · 10 363 descargas
-
stlcryptex_ring1_inlay.stl
345 Ko · 10 366 descargas
-
stlcryptex_centeral_support_6.stl
41 Ko · 8 173 descargas
-
stlcryptex_centeral_support_7.stl
39 Ko · 8 207 descargas
-
stlcryptex_core_tube_6.stl
191 Ko · 8 201 descargas
-
stlcryptex_core_tube_7.stl
180 Ko · 8 240 descargas
Descripción
There are many cryptex models around, but this one can be set to any 5 letter word you want.
NEW
If you have a larger print bed than my little 120mm one you can now print 6 or 7 letter cryptex! Just use cryptex_central_support_6 and cryptex_core_tube_6 for 6 letters and their _7 versions for 7. Dont forget to print extra letter rings.
NEW: Alternative skull end, a combination of the original ball end and thing:11953 - elvis the printable skull. Perfect for a pirate themed cryptex. NOTE: Print at 50% size to match the rest of the parts (CAD package would not shrink Elvis)
New2: Ring2 now features anti-pick features. This makes trying to guess the code by testing the resistance of the rings to turning much more difficult.
Folk who have already printed ring2 can add these features by filling 0.5mm groves into the sides.
Alternative ring1 added with reversed letters for easier printing. I found this more difficult to get a good paint finish, but I'm not too good with a brush. Print with inlay versions of locking ring and spacer ring.