scx24 e1
por ieConcepts
Archivos imprimibles (18)
-
stlie_Concepts_SCXe1_Grill_mk4_lowBatt.STL
730 Ko · 973 descargas
-
stle1_Motor_Side_Panel_Final.stl
37 Ko · 1 696 descargas
-
stle1_Roof_Bar_Final.STL
26 Ko · 1 708 descargas
-
stle1_Side_Panel_final.stl
203 Ko · 1 682 descargas
-
stle1_Roof_Panel__Final.STL
184 Ko · 1 711 descargas
-
stle1_Hood_Final.STL
308 Ko · 1 709 descargas
-
stle1_Main_2of2_Final.stl
729 Ko · 1 726 descargas
-
stle1_Main_1of2_Final.stl
730 Ko · 1 731 descargas
-
stle1_Twin_Fans_Final.STL
1.1 Mo · 1 636 descargas
-
stle1_roof_panel_Axial_Logo.stl
150 Ko · 953 descargas
-
stle1_rear_mk3.5.STL
981 Ko · 1 002 descargas
-
stle1_grill_final_dopey_eye.STL
2.6 Mo · 935 descargas
-
stle1_grill_final_angry_eye.STL
2.6 Mo · 962 descargas
-
stle1_Rad_mk2_Back.STL
335 Ko · 939 descargas
-
stle1_Rad_mk2_Main.STL
1.1 Mo · 935 descargas
-
stle1_Rad_mk2_Fan_x2__Use_Filament_as_Pin.STL
1.2 Mo · 929 descargas
-
stle1_Grill_Final.STL
2.5 Mo · 708 descargas
-
stle1_Hood_V2.STL
555 Ko · 508 descargas
Descripción
A collaboration with some like minded people from around the world. The project started as an Gmade R1 inspired drawing uploaded to the FB group SCX24 Mods and Fun. The project turned out to be a lot of fun and ended up with something quite amazing.
Works with stock parts. Tested with a C10 running gear.
Required;
6x M1.6 x 8 bolts (or similar sized) 2 need button/flat heads to clear shocks
Strap / Rubber band to secure the battery. .
2x 3mm x 1mm magnets for the bonnet
Servo extension lead
For updates and future releases check out my FB Page ie Concepts @ https://www.facebook.com/Designer435
FB Group SCX24 Mods and Fun @ https://www.facebook.com/groups/2132733196854576/