Variable bathroom box set
por Empiricist1
Archivos imprimibles (9)
-
stlBath_Box.stl
228 Ko · 837 descargas
-
stlBath_Box_Tray.stl
147 Ko · 767 descargas
-
stlBath_Box_2_insert_2x.stl
232 Ko · 794 descargas
-
stlBath_Box_2_insert_3x.stl
233 Ko · 812 descargas
-
stlBath_Box_2_insert_4x.stl
236 Ko · 769 descargas
-
stlBath_Box_2_insert_4x_asym.stl
236 Ko · 817 descargas
-
stlBath_Box_2_insert_5x.stl
238 Ko · 794 descargas
-
stlBath_Box_2_insert_6x.stl
241 Ko · 747 descargas
-
stlBath_Box_2_insert_9x.stl
246 Ko · 748 descargas
Descripción
This is a customizable open box set, I designed for organizing my bathroom accessoires, but it can be usable in other contexts, too.
There are 8 different boxes and one tray you can chose from, with different numbers of compartments (from 1 to 6, one with 9, and one with an asymmetric 4x space), to help you organize your bathroom items. The tray is meant to put down your glasses, earrings, watches, etc. at a designated place in your bathroom, while using the bath or shower.
The boxes are 180x180x60 mm - if you need them smaller or bigger, you can scale them up or down (x, y - or if needed also z) in your slicer. This should work fine within reason.
I used PETG, but the prints will also be fine in PLA or ABS for use in a bathroom. I used 0.2mm layer heigth, but 0.3 mm should be fine either. With 0.2 mm the print time is about ~10-14 hours, depending on the type of box and your slicer settings. No supports are needed.
Enjoy!