Rome Custom Insert

UPDATE 22/01/25: Thanks to feedback from Jimaldo, I have replaced the insert a V2 design which has a component tray 1.5mm deeper. This allows everything except the pawn to be stored in the tray (see the images for the original and V2 storage suggestion). If you have printed the original and don't want to reprint, the insert also works fine without the lid, relying on the play mats and rules to hold things in place, although it may not hold up to violent shaking!

The next installment of my Solo Game of the Month custom inserts is for Rome (shipping at the time of this post), designed by Joe Klipfel (designer of Gloomhaven: Buttons and Bugs, and lots more) and Gamefound campaign by Gabe Barrett.

Sleeved cards will not fit in this insert, as with many Solo Game of the Month games, due to the amount packed into the VHS case.

Let me know what you think and if you have any suggested improvements, or need something similar for another game.

All my Boardgame Bits, models and files are on my Patreon page.

EDIT: If you downloaded the insert prior to 4 December 2024 you will find that the lid can sink into the compartment.

You have 3 options:

1. Leave it as is.
2. Download the attached insert and re-print it (the original lid is fine).
3. Don't use the lid, the play mats and rules tend to hold the components in place well enough.

I'm sorry, there was an error on the wall width below the lid level which meant that there was not enough of a ledge to fully support the lid... This is corrected in all current files.