Austroraptor
por Limonero
Archivos imprimibles (25)
-
stlCylinder.stl
8.2 Mo · 783 descargas
-
stlAmmo.stl
2.5 Mo · 764 descargas
-
stlBody_1.stl
38.3 Mo · 769 descargas
-
stlHammer.stl
245 Ko · 760 descargas
-
stlLaser_Sight_1.stl
11.6 Mo · 763 descargas
-
stlLaser_Sight_2.stl
28.2 Mo · 775 descargas
-
stlBarrel.stl
124.1 Mo · 814 descargas
-
stlBarrel_Part_1.stl
1 Mo · 754 descargas
-
stlBarrel_Part_2.stl
1 Mo · 757 descargas
-
stlBarrel_Accent_1.stl
12 Mo · 764 descargas
-
stlBarrel_Accent_2.stl
12 Mo · 761 descargas
-
stlBarrel_Accent_3.stl
427 Ko · 753 descargas
-
stlBarrel_Accent_4.stl
427 Ko · 756 descargas
-
stlKnife.stl
7.1 Mo · 765 descargas
-
stlGrip_soft.stl
15 Mo · 763 descargas
-
stlGrip_hard.stl
15.8 Mo · 765 descargas
-
stlGrip_Base.stl
933 Ko · 761 descargas
-
stlGrip_Core.stl
2 Mo · 757 descargas
-
stlGrip_Accent_1.stl
914 Ko · 758 descargas
-
stlGrip_Accent_2.stl
914 Ko · 765 descargas
-
stlCylinder_Crane.stl
424 Ko · 758 descargas
-
stlCylinder_Crane_Part_1.stl
70 Ko · 756 descargas
-
stlCylinder_Crane_Part_2.stl
126 Ko · 768 descargas
-
stlCylinder_Crane_Part_3.stl
43 Ko · 760 descargas
-
stlFront_Sight.stl
67 Ko · 759 descargas
Descripción
This is a model I made quite a while ago — back in 2023 or even 2022. Looking at it now, it feels a bit simple (the articulation isn’t great, so if it causes issues, you can just glue it in place). But overall, it still works fine.
I made two versions of the grip: one is rigid — it’s just a solid piece. The other one is designed to be printed in TPU — it has an inner core, and the soft grip slides over it.
There’s also a small part called Cylinder Crane Part 3 — it’s used to cover the exposed rotation shaft.
One last thing: be careful around the rear sight area. Those parts are a bit fragile.
I'm kind of lazy and don't feel like reopening the document to add a signature. I'm fine with it as it is.
P.S. Something in the photo is assembled backwards—don’t follow my picture exactly.