Automatic Print Ejector - The Punching Machine
por MatterHackers
Archivos imprimibles (10)
-
stlOpenBeam_L.STL
41 Ko · 8 722 descargas
-
stlReverse_Gear.STL
75 Ko · 8 652 descargas
-
stlGear.STL
37 Ko · 8 661 descargas
-
stlHalf.STL
23 Ko · 8 663 descargas
-
stlEnd.STL
31 Ko · 8 687 descargas
-
stlLinkage.STL
31 Ko · 8 838 descargas
-
stlwades_small_gear.stl
289 Ko · 8 595 descargas
-
stlStand.STL
28 Ko · 8 646 descargas
-
stlDrive.STL
90 Ko · 8 735 descargas
-
stlBoxing_Glove_2.stl
899 Ko · 8 980 descargas
Descripción
Achieve 3D printer autonomy by adding an Automatic Print Ejector to your machine. This mechanism will knock the printed part off the bed when it is finished printing. We like to call it the punching machine, Check the video above to see why.
For a complete component list and assembly instructions head to this write up: http://www.matterhackers.com/store/digital-designs/automatic-print-ejector-the-punching-machine
Developed by the MatterHackers Engineering Team - the Punching Machine gives your printer the ability to remove the printed part from the bed without any human interaction. See it in action Here: https://www.youtube.com/watch?v=Viy928RLsdU
- Printing Recommendations -
All parts were printed with MatterHackers Pro Series PLA. http://www.matterhackers.com/store/3d-printer-filament?t=1.75mm%20PRO%20Series%20PLA
Recommended Print settings:
- Layer Height: 0.2 mm Layers
- Perimeters: 2 Perimeters
- 30% Infill