Brushed FPV Microquad

My latest brushed microquad design. I wanted something as small as possible that would still fit a Beef's Brushed Board 8.5mm motors and 2.5" props (will fit rolling spider props as well, but it's tight) and came up with this 100mm MTM pod-like design. The camera mount is designed to fit the Quanum Elite Micro Camera/vtx combo from HobbyKing (great piece of electronics!). I also wanted the camera angle adjustable. It's a bit on the heavy side (73g AUW with a 750mah battery) but flies good. It's a design in progress, I might change the top a bit to reduce the overall height and protect the camera/antenna a bit more.

You'll need four nylon standoffs and four 6-8mm long M2 screws to complete the build. Four additional nylon standoffs can be used as landing gear to protect the battery. The battery is held in place with two small rubber bands