Micro X Quad
di DoubleTap_FPV
File stampabili (7)
-
stlCage_-_Camera.stl
267 Ko · 1 056 download
-
stlCage_-_Plane.stl
250 Ko · 1 036 download
-
stlCage_-_Plane_No_Standoffs.stl
206 Ko · 1 014 download
-
stl20_deg_Fixed_mount.stl
183 Ko · 1 042 download
-
stlQuanum_20_deg_Fixed_mount.stl
172 Ko · 1 035 download
-
stlX-Main_Plate_1.stl
719 Ko · 1 029 download
-
stlCat-Main_Plate.stl
706 Ko · 1 005 download
Descrizione
Brushed micro-quad designed in collaboration with Michael Grabner of RCFPVFlight.com for FPV fun. This quad is designed to work with 8.5 mm brushed motors and a brushed controller. I use the Hubson x4 motors and controller but there are several other boards available. There are two main frames, one that is a perfect X and one with the front arms splayed out a bit to keep the props out of the camera view. There are three top plates as well, one basic, one with a mount for a micro camera and one without standoffs. I have also included a 20 degree camera mount designed for the Quanum ELITE TX CAMERA COMBO Micro Cam. If there is interest I will design other angles.
As always constructive feedback is encouraged
Update 6/9/16 Version 2.0 of both main plates have been uploaded. These new versions are much stronger and stiffer and fix a weak spot in the original design
The front camera mount was inspired by the micro 105 FPV Quadcopter
The Quanum camera mount was inspired by the Quanum ELITE TX CAMERA