Inductrix / Tiny Whoop frame
di Jimbob
1 / 5
File stampabili (3)
Descrizione
6mm motors should fit nice and snug when printed in ABS (not tested it with pla)
You may need longer screws to mount the board (I'll do an update with raised mounts like the stock frame)
EdIt: Added mk2 file with raised fc mounts to fit the grommets and removed lip on top of the ducts to shed some weight.
Edit: Mk2.5 is same as mk2 with 0.5mm shaved off the top of the ducts to help bed adhesion