Hypercube Evolution Electronics Housing ( HUGE )
di pyto00
File stampabili (14)
-
stlDoor_right-up.stl
566 Ko · 1 644 download
-
stlDoor_left-up.stl
566 Ko · 1 631 download
-
stlBody_mid-under.stl
644 Ko · 1 634 download
-
stlDoor_mid-up.stl
402 Ko · 1 638 download
-
stlDoor_right-under-fan.stl
545 Ko · 1 637 download
-
stlDoor_left-under.stl
360 Ko · 1 637 download
-
stlBody_mid-up.stl
646 Ko · 1 641 download
-
stlFan_Grill.stl
321 Ko · 1 633 download
-
stlBody_left-under.stl
550 Ko · 1 635 download
-
stlDoor_mid-under.stl
331 Ko · 1 625 download
-
stlBody_right-under.stl
1 Mo · 1 634 download
-
stlDoor_left-under-fan.stl
551 Ko · 1 635 download
-
stlBody_right-up.stl
1.1 Mo · 1 636 download
-
stlBody_left-up.stl
962 Ko · 1 632 download
Descrizione
This is an alternative take on the electronics compartment of hypercube evolution printers.
It uses the back side of the printer to house all the electronics.
The voron electronics case is used as a base but completedly redesigned to fit a 300x300x400 HEVO.
Voron Electronics case : https://www.thingiverse.com/thing:2155152
This case can fit the following electronics:
- MKS Base Gen1.4
- Maxwell 5V PSU
- Raspberry Pi 3
- E3D Pt100 Amp board
- 2x AliExpress Mosfets
- PSU with 150mm x 50mm screw pattern
Bolts and nuts for the housing:
24x M3 brass inserts
28x M3 Hex Nuts
32X 10mm M3 Socket Head Cap Screw
12X 20mm M3 Socket Head Cap Screw
10X 25mm M3 Socket Head Cap Screw
8X 10MM M4 Socket Head Cap Screw
Bolts and nuts for the Hardware:
4x 8mm M4 Socket Button Head Screw - 24V PSU
4x 8mm M2.5 Socket Head Cap Screw - RPi
16x 8mm M3 Socket Head Cap Screw - MKS, Mosfets, pt100 amp