Pole Ski
di zxcvbn
File stampabili (16)
-
stlfront_pt1_v1.3.stl
310 Ko · 2 460 download
-
stltop_v1.3.stl
338 Ko · 2 464 download
-
stlfront_pt2_v1.3.stl
533 Ko · 2 450 download
-
stlfront_v1.3.stl
780 Ko · 2 460 download
-
stlback_pt2.stl
413 Ko · 2 444 download
-
stlback_pt1.stl
1.1 Mo · 2 452 download
-
stlback.stl
1.4 Mo · 2 448 download
-
stlpole.stl
558 Ko · 2 449 download
-
stlservo_mount.stl
101 Ko · 2 421 download
-
stlimpeller_21.2mm_15mm_long.stl
2.4 Mo · 2 419 download
-
stlnoozle_angled.stl
1.9 Mo · 2 115 download
-
stlbaby_beast_2206_shaft_joint_15mm.stl
82 Ko · 2 101 download
-
stlimpeller_21.2mm_21mm_long.stl
392 Ko · 1 933 download
-
stlimpeller_21.2mm_25mm_long.stl
392 Ko · 1 929 download
-
stlimpeller_21.2mm_28mm_long.stl
392 Ko · 1 939 download
-
stlmiddle_with_motor_mount.stl
542 Ko · 823 download
Descrizione
Pole Ski
270mm long with out the jet nozzle.
Uses 2 2000mah 18550 batterys, they fit down the sides of the jet unit. Mine came from a laptop battery with a dead cell.
Still needs more power, might try squeeze a 3rd cell in or come up with some thing else.
Nozzle needs to angle up a bit as its pushing the front down, probably sort it soon.
3x7x3 bearing in the nozzle x1
150mm long 3mm shaft
Baby beast 2206, might be better with a higher KV motor.
Print the impeller 2x and glue them together.
20/11/18
New upwards angled nozzle, bit less like a submarine now.
Still way under powered, maybe a 4500kv motor would be ok on 2s the baby beast 2150kv I have is to slow.
9/12/18
Added 3 different pitch impellers (untested)
Might change the hull bottom soon to make it float a better.
04/02/20
Have redesigned this, now only 230 long with out nozzle. New hull bottom shape so it floats better and bigger jet. Using 2 450 mah 2s battery's that fit down the sides of the jet.
Just in the final stages of assembly and then testing. I'll probably upload it as a new thing instead of adding it to this one.