Easter Bunny Springo
di bitsplusatoms
File stampabili (6)
-
stlRight_Eye.stl
37 Ko · 3 018 download
-
stlLeft_Eye.stl
37 Ko · 3 021 download
-
stlBunny_Nose.stl
487 Ko · 3 020 download
-
stlBunny_Head.stl
2.2 Mo · 3 028 download
-
stlBunny_Body.stl
5.9 Mo · 3 036 download
-
stlSlingo_Bunny.stl
6.2 Mo · 3 112 download
Descrizione
I was inspired by Devin Montes (@MakeAnything3D) to create a slingo of my own - an Easter Bunny.
It's my first attempt and I've included the Fusion 360 file. You'll notice that the head and body are in two separate parts. I did this mostly for my own convenience during the development process. I've included STLs for the head and body separately, and 1 big STL that includes them both. If you print them separately you can print the head at a low infill. The body should be 100%. If you print the single model, you can use your slicer to change the infill settings of the two areas if you'd like. I did this in Slic3r.
There are also STLs for the left and right eye and the nose. I printed these in a different color and they snap into place. You could use a dot of glue, but I didn't find it necessary - especially for the eyes.
Here are a couple of short videos showing the bunny:
Cracking apart the layers
The finished product
I've printed this design on a Prusa MK3 and an Ender 3. A friend printed it on a CR-10.